[seekandestroy78]

Excal serial num : 451
Style: gloss black (type 2) half milled
Date recieved : early 05
Approx num of shots: a lot
Rof: 19
Settings:nelson stock i guess
Lpr pressure: 70ish
Feed tube : ccm no rise
Pinches per hopper: 5-6 with an evoII
Chops: 0
Breaks: none with evil
Loader: evoII, halo to come
Air system: pure energy 45/45
Consistency: not too good for some reason
Efficiency: damn good for such a small tank
Prefered barrel: 14" ultralight
Any problems: a little inconsistent and i dont know why
Comments: selling for a viking

[deathstalker]

Excal serial num : EX#A00900
Style: Matte black unmilled
Date recieved : Received BNIB 08/31/2005
Approx num of shots: 0
Rof: 14bps
Settings: Stock
Lpr pressure: Stock
Feed tube : LAPCO
Pinches per hopper: 0
Chops: 0
Breaks: 0
Loader: H.A.L.O.
Air system: 68/4500 Max-Flo
Consistency: ?
Efficiency: ?
Prefered barrel: Freak or J&J Edge
Any problems: Haven't put paint through it yet, but I can't wait!

[Luke40KPaint]

Excal serial num : 1643
Style: Dust Black Smooth Mill FL
Date recieved : Jan 04
Approx num of shots: 40,000
Rof: As slow as my fingers
Settings: Dwell 12 / Debounce 3
Lpr pressure: 72
Feed tube : BP clamp
Pinches per hopper: 0
Chops: 0
Breaks: 10 or so with cheap paint, 0 with good paint
Loader: HALO
Air system: 68/45 Crossfire
Consistency: +-4
Efficiency: I fill 2 times per day and bring air home to play around with. and I shoot a case per day.
Prefered barrel: UL
Any problems: Just the problems I have made.
Comments: Great for woods ball, can shoot people and the other's with them dont know where the shots came from.

[lopez17]

Excal serial num : 0017
Style: 02 Full Mill with Turquoise Acid Wash Anno
Date recieved : Jan 06, bought from Schurm
Approx num of shots: Who knows!
Rof: 8-10
Settings: Still playing with the Tadao...will post once I get em firmed up.
Lpr pressure: Not a clue.
Feed tube : Clamping
Pinches per hopper: 0
Chops: 0 so far
Breaks: 0 so far
Loader: HALO or Reloader B
Air system: 68/45 Crossfire or 88/5K PE
Consistency: +/- 4 fps.
Efficiency: TBD
Prefered barrel: CP 2 Piece
Any problems: Just that it hasn't been used in too long!
Comments: This baby is going to DC or JMJ soon for milling, a new anno and much needed upgrades and TLC. It's also getting an anno, snatch grip, trigger, feed neck, MM and SCM.

[$pinoff42]

Excal serial num : 1663
Style: 04 Bonebrake milling with 90* Tarantula frame
Date recieved : May 04
Approx num of shots: unknown
Rof: 27
Settings: tadao, debounce 1, abs 1, cpf 1, psp unlimited, loader delay 1
Lpr pressure: 50
Feed tube : FBM hooker
Pinches per hopper: 0
Chops: 0
Breaks: 0
Loader: halo with V35
Air system: 68/3000
Consistency: +2/-2
Efficiency: about 1400
Prefered barrel: Hammerhead pro series with fin kit
Any problems: nope
Comments: first excalibur is AKA history to have a mQ valve installed

[yakitori]

Excal serial num : 1612
Style: 04 streamline stormtrooper
Date recieved : 8-18-06
Approx num of shots: unknown
Rof: unlimited
Settings: Pandora rmod 4.2, dwell 8ms, db 2ms, bolt close 26-28ms, bolt open 64ms (default), bolt delay 5ms, ars 1ms, ace debounce 2ms, everything else stock
Lpr pressure: 70psi
Hpr Pressure: ~200 or so
Feed tube : Lapco twist lock
Pinches per hopper: 2 total until settings adjusted, then no more pinches
Chops: 0
Breaks: 0
Loader: cheetah halo
Air system: 68/3000
Consistency: +/-3 fps
Efficiency: about ~1400
Prefered barrel: cp full bore kit 14"
Any problems: Noid leaked, but seller replaced it, shoots great now. Love this gun.

[Paintballislife42]

Excal serial num : 140
Style: Full Mill, Blind
Date recieved : 3/13/08
Approx num of shots: ? been in storage for 7 years
Rof: 13
Settings:
Lpr pressure: 70
Feed tube : A+
Pinches per hopper:
Chops:
Breaks:
Loader: Reloader B
Air system: MacDev Legionair PushButton
Consistency:
Efficiency:
Prefered barrel: Lapco Snapshot
Any problems:
Comments:

[Toddles]

Excal serial num : EXA875
Style: 03 JMJ Swirl with ASA cute
Date recieved : 12/11/08
Approx num of shots: unknown
Rof: unlimited
Settings: Default WAS settings
Lpr pressure: 70psi
Hpr Pressure: Unknown
Feed tube : BP no rider
Pinches per hopper: 0
Chops: 0
Breaks: 0
Loader: B2
Air system: 68/4500
Consistency: +/-3 fps
Efficiency: Close to a case
Prefered barrel: No preference
Any problems: None.

[Skyguy]

Excal serial num: EX#B 01580
Style: 04 Unmilled Type-III
Feed tube: AKA low-rise
Prefered barrel: Dye UL, DW Fibur kit
Upgrades: Yakuza cocker board, MQ2 valve, Robtown ram, 1st gen 2L, STD lpr, MM, Valhalla frame, Acid Customs CF trigger, and WM aluminum bolt pin

[Skyguy]

Also,

Excal serial num: EX# 00151
Style: 02 Fullmill single trigger, green with yellow and black splash
Rof: <10
Lpr pressure: 60
Feed tube: BP no-ride
Consistency: Haven't chopped yet
Efficiency: Something amazing and ridiculous
Prefered barrel: Ano-matched javelin and ano-matched freak with AA 12" front
Comments: Robtown valve, Tadao, magnetic return single trigger, SCMIII, short sidewinder, and DC volly

[onionheadfriend]

Excal serial num : id tell you but its been milled off
Style: acid washed PBX
Date recieved : cant remember
Approx num of shots: ?
Rof: fast
Settings: too lazy to check on the tadao
Lpr pressure:
Feed tube : ccm
Pinches per hopper:nope
Chops:when my friend tried to use a gravity hopper.
Breaks:
Loader: revy
Air system: 68/45
Consistency:+/-2
Efficiency: didnt check
Prefered barrel: cp two piece
Any problems:no serial number and a bit heavy for being milled
Comments:dont ever use a gravity hopper....turns it into a blender.

[langless28]

Excal serial num : A00858
Style: Stock mill, pool bottom anodizing
Date recieved : 2010
Approx num of shots:
Rof: capped at 15
Settings: dwell = 8
Lpr pressure: 65
Feed tube : A+ machine low rise
Pinches per hopper: ZERO
Chops: ZERO
Breaks: ZERO
Loader: Halo
Consistency:
Efficiency:
Prefered barrel: jav
Any problems:Nope
Comments: was drilled for "internal eyes before it arrived to me. equipped with DC wave style trigger and matching sidewinder.

[Paintballislife42]

Excal serial num : B01709
Style: 04 unmilled Ebisu
Date recieved : 02/2011
Approx num of shots: ??
Rof: set unlimited semi
Settings:
Lpr pressure: 72 STD/JDS lpr
Feed tube : BartParts
Pinches per hopper: 0
Chops:0
Breaks:0
Loader: Seed RtR Rotor
Air system: Ninja 50/45
Consistency: +/- 2
Efficiency:
Prefered barrel: J&J Pro Edge kit w/widgets
Any problems:all wiring harnesses sucked have ordered new ones
Comments: it is in great shape. glad to be back in the aka family
AC AKA 1 C/F trigger

[Enfamous13]

Excal serial num : A00837
Style: Black 03 Unmilled Brick, WAS 1.6
Date recieved : 02/24/2011
Approx num of shots: ??
Rof: Semi
Settings: Dwell 12
Lpr pressure: 72
HPR pressure: ??
Feed tube : A+ No Rise
Pinches per hopper: 0
Chops: 0
Breaks: 0
Loader: Rotor
Air system: Ninja 45/4500
Consistency: ??
Efficiency: ??
Prefered barrel: Smart Parts Freak
Any problems: Had a leak from the hammer solenoid
Comments:JMJ Snatch grip, red eyes, red bolt, jmj razor trigger, sm3. Second AKA marker, I like it more than the Viking I got

[Frizzle Fry]

Excal Serial Number:
#231

Style:
2k2 - Team Gun (Damage Inc) - Factory Purple/Black Acid Wash

Date Received:
Fall 2009

Approx Number of Shots:
Unknown (MANY!)

ROF:
Uncapped

Settings:
Pandora Board, Uncapped Semi

LPR Pressure:
65 PSI

Feed Tube:
CCM NoRise Heliclamp

Pinches Per Hopper:
N/A

Chops:
Rare

Breaks:
Rare

Loader:
Pinokio

Air System:
Ninja SLP Regulator, Angel Air "Lesbian Kiss" 68ci/4500psi, Crown Royal Bag

Consistency:
+/-2 FPS

Efficiency:
2300+ shots, 68/4500

Preffered Barrel:
Smart Parts Freak back, All American Front

Any Problems:
RobTown valve occasionally acted up on very cold days; serious velocity drops would occur when the valve failed to seat properly. After a rebuild the issue has disappeared. Considering an SCMIII and volumizer to achieve +/-1 at the chronograph.

Comments:
I am the third owner.

Originally made for Gary (GaryPB) of Damage Inc in 2002. "Factory" purple and black acidwash courtesy of Gruntbull for AKALMP. While he owned it sported a Damage Inc sticker, and if you look carefully at the passengers side you can see a ghost of the logo. It gained an original CCM feedneck, DYE grips and a snatch grip while in his possession, but stayed stock otherwise.

Sold to Keith (Cougar20th) in 2005, at which point it was sent to Destructive Customs and acquired a Pandora board and break beam anti-chop eyes with covers, as well as a much brighter LED. It retained the CCM feedneck and DYE grips, and lost the snatch grip while it was in his possession.

I purchased the marker in the fall of 2009, at which point I swapped the old CCM feedneck for a new matching CCM Heliclamp, swapped the stock trigger for a JMJ Nurvous, added a matching Freak barrel with All American tip, and installed a RobTown valve. The solenoids have been upgraded and it has had "hidden" internal pocket milling which has been treated to prevent oxidization.

I still play with the marker regularly.