hey guys. i have a small leak down the barrel of my dm7 and and another leak between the body and frame of the gun. it dosent effect performance as it still shoots i would just like it fixed.
what orings should i change? and what else should i try?
none of this is working. i also looked at the solinoid gasket it seems fine no nicks or anything. i also cleaned it and applied some sleek to the gasket. i know the lpr isnt leaking because its not coming from that screw. ive changed those orings on the bolt. what else could i do?
The front on/off on the DM6-DM8 is for purging the marker when you have degassed it. If your On/Off doesn't turn, it means that one of the set screw holding it has been screwed in tighter to stop it from turning. (Some people do that instead of getting the CP flow plug)
If you look at your DM7's manual (or download it), page 11 has the picture of the on/off valve, and instructions how to service that part.
Common issue is the inner clear oring yellowed and harden up... it will cause leak blowing out from the back of the on/off towards the noid... also a common problem making people think their noid is leaking.
"Originally posted by msonic: Viagra is not supposed to be taken as a suppository..."
"Originally posted by x420psykoticx: "business casual" to me means a gold mini skirt and a see through haltertop"