none of the harnesses included with the RF fitting the aux socket, I have installed the Y-harness in the solenoid port of my geo2
anyone doing that too? what do you guys think? will the geo2 turn off like the geo ?
You can use the Y-harness and it should work fine. I just tried it with my GEO2 and had no problems. I recommend using the Eclipse RF loom as it will cut down on the wire spaghetti you'll experience with the Y-harness. You definitely wouldn't want all the wires to get in the way of your trigger activation.
thank you for your reply P4R4D1GM ; well , it is obviously a bit messy with the wires, but there is imo plenty of room in the geo2 frame to have the RF nicely fitted in, that was by far the easiest to do compared to the marq and dm9 ( really tight )