[JustinPB]

Okay nation i dont know what it is but ive ownd 2 luxes my first luxe shot flawless it had no kick super smooth/ quiet and shot ball on ball and could easily shoot across the field. My current luxe has some kick in it, not as smooth or quiet and it is not ball on ball it has some scatter shot and im under boreing the insert also it is having a hard time traveling down the field anyone know any way to get my luxe sounding and shooting like a real luxe should? Also i have 2 lose orings in the bolt guide there the front 2 on the bolt guide and was wondering if they were suppose to be loose one has wiggle room and they both easily spin around the bolt guide they don't seem like they fit but was wondering if there suppose to be that loose or not and there is also a loose oring on my bolt that has wiggle space and its the furthest oring in the back of the bolt was wondering if its suppose to be like that or not
Thanks nation

[Evac.]

Did you consider cleaning the gun? Just use the search bar. These threads pop up all the time

[JustinPB]

Originally Posted by Evac.

Did you consider cleaning the gun? Just use the search bar. These threads pop up all the time

i have cleaned it and theres no dirt or paint or anything any where in it the bolt and power core and bolt guide were over lubed and i cleaned off the lube and re lubed it

[wyndan21]

dude did you buy it used?? check if theres a eff rod in it this will make it not as smooth and give it more kick...

[JustinPB]

Originally Posted by wyndan21

dude did you buy it used?? check if theres a eff rod in it this will make it not as smooth and give it more kick...

yes its used and pretty brand new and no there is no eff rod in it

[gildy1]

i had the same prob. I sent mine into darryl to get totally tune and shooting right, his prices are actually really good.

[JustinPB]

Originally Posted by gildy1

i had the same prob. I sent mine into darryl to get totally tune and shooting right, his prices are actually really good.

how much did he charge you?

[XxTexasfuryxX]

And yes those orings around the bolt guide are a little lose, atleast mine were.

[JustinPB]

Originally Posted by XxTexasfuryxX

And yes those orings around the bolt guide are a little lose, atleast mine were.

okay thanks

[digital sol]

Originally Posted by JustinPB

Okay nation i dont know what it is but ive ownd 2 luxes my first luxe shot flawless it had no kick super smooth/ quiet and shot ball on ball and could easily shoot across the field. My current luxe has some kick in it, not as smooth or quiet and it is not ball on ball it has some scatter shot and im under boreing the insert also it is having a hard time traveling down the field anyone know any way to get my luxe sounding and shooting like a real luxe should? Also i have 2 lose orings in the bolt guide there the front 2 on the bolt guide and was wondering if they were suppose to be loose one has wiggle room and they both easily spin around the bolt guide they don't seem like they fit but was wondering if there suppose to be that loose or not and there is also a loose oring on my bolt that has wiggle space and its the furthest oring in the back of the bolt was wondering if its suppose to be like that or not
Thanks nation

buy an o-ring replacement kit for the luxe..

re-move and rebuild the reg with fresh o-rings
remove and replace the bolt o-rings and blt guide o-rings...basically replace all the o-rings inside the can, on the bolt and firing rod as well as the inside back-cap

check the dwell settings and such and if the marker is stock set them to the default settings...go shoot half a case...guarantee it"ll shoot 10x better...

anytime you buy used you should replace all the o-rings that matter on the gun and start fresh..amazing what a little tlc can do to the performance of a marker.....

[JustinPB]

Originally Posted by digital sol

buy an o-ring replacement kit for the luxe..

re-move and rebuild the reg with fresh o-rings
remove and replace the bolt o-rings and blt guide o-rings...basically replace all the o-rings inside the can, on the bolt and firing rod as well as the inside back-cap

check the dwell settings and such and if the marker is stock set them to the default settings...go shoot half a case...guarantee it"ll shoot 10x better...

anytime you buy used you should replace all the o-rings that matter on the gun and start fresh..amazing what a little tlc can do to the performance of a marker.....

okay thanks man