Originally Posted by thedjap1
Only issue I had with the bolt is some fsdo. I would shoot my gun and a paintball would go out the barrel real slow and after that first shot it would shoot fine. Anyone else had this issue?
happend to me to. breaking it in for a case really helps... ALSO, lube it with a good non swelling lube.. Lube all orings and the stem of the bolt. Make sure not to get lube on the vertical faces of the bolt and can. this will cause FSDO
when doing what i just said, most people can run their dwell at 12ms and 0-1abs for the first few cases. Once broken in better they can run 10ms with 0-1ABS. Some even go to 8ms.
Its all in the lube, for me at least. When i used dow33.. i had to have my abs at 2 but when i switched to lurker lube, i ran 10-14ms without abs on at all. Stock bolt and engine.