[noobslayer4619]

On my Wrath LTD the stock asa on the gun is getting really loose and the whole piece actually slides back and forth, what after market asa/bottomline/drop is compatible with my gun?

[pbjunkie2025]

The Wrath uses a reverse dovetail so no aftermarket ASA will work directly that I'm aware. To give you the most options, you should upgrade to macroline if you still have the steel braided hose. The good thing is that the Wrath also provides standard inline holes in the trigger frame. You can use a drop or rail that uses the inline hole pattern then whatever ASA matches up with that. The other option is a direct mount ASA with the inline hole pattern, though this will probably not give you the flexibility to move the ASA.

[The Inflicted]

Originally Posted by noobslayer4619

On my Wrath LTD the stock asa on the gun is getting really loose and the whole piece actually slides back and forth, what after market asa/bottomline/drop is compatible with my gun?

If you look at the front of the ASA above where the hose screws in there should be a hole. Tighten the bolt in that hole and the ASA will stop sliding around.