Searching for a part..

werminator · 09-17-2010, 10:43 PM

I know it is an extreme long shot, but I am trying to locate an FEP barrel back in dust black with a .690 bore... Not to make it harder on myself, but I want it to have the FEP logo on it and not 007... Really what I am trying to say is that somewhere along the line someone swapped out a stock back with that back in a kit that I bought and I want it to be whole again... As I said... Its a long shot but to me one worth taking...

Fallinher0 · 09-18-2010, 02:21 AM

You havent tried going through feedback?

werminator · 09-18-2010, 01:09 PM

No hero... I am not too sure as to where to start

bomb_xero · 09-18-2010, 03:20 PM

I don't know off the top of my head but my kit has .689 I don't think there was a .690

werminator · 09-19-2010, 02:19 AM

Well my kit has a .687, a .693, and a .696...
From what I have read, I am missing a .690 and based on the other sizes in my kit, that would be logical...

chnk · 09-20-2010, 01:39 PM

Quote:

Originally Posted by bomb_xero

I don't know off the top of my head but my kit has .689 I don't think there was a .690

lol i miss that kit

xceolite · 09-24-2010, 11:06 AM

I have the stock gloss black barrel back (dust tip) and it is 0.689. Interested?

werminator · 09-24-2010, 12:46 PM

Is it stamped .689? That would be strange because from what I know about Quests, the older ones had a stock .696 and the newer barrels had a stock .691. Either way, no thanks ceo...

xceolite · 09-24-2010, 01:30 PM

Yep, it is stamped with 0.689. Got it with my quest, when I got it 3 years ago.
The serial number is 777, so it is a early one as they started at 666, I believe.

werminator · 09-25-2010, 09:33 AM

Which logo is on the side? Is it the FEP logo or 007?

Uziel Gal · 09-25-2010, 02:52 PM

If I remember correctly, Quests started with 0.689 barrels. When overboring became all the rage, FEP switched to 0.696, but a lot of people thought this was *too* big, so the calibre was then lowered to 0.691.

werminator · 09-26-2010, 09:06 PM

Uziel you thread whore. As always your input is greatly appreciated... =^)

Uziel Gal · 09-27-2010, 12:23 AM

I get around.....

werminator · 09-30-2010, 02:37 PM

Proof of the size I need.

http://www.pbnation.com/archive/inde...t-1376690.html

read it and weep!

jeffreyjames · 10-04-2010, 07:09 AM

mine came with a .689. perfect size. near as i can remember the kits came with a .87,. 92.96. or a 89, 93, and 96. but i could be wrong about that.
i THINK they all came with a 007 logo, but i only have my stock barrel to go by. it has the logo. i dont know if the kits came with them. 007 is defintitely a stock barrel, whatever size.

werminator · 10-05-2010, 04:46 AM

Read the thread I linked please. The kits came with 4 backs and 1 14" front. They mostly had the FEP company logo on the backs and 007 was milled around the circumference of the tip. I am hoping someone has my .690 in their gearbag...

AaronGPB · 10-06-2010, 11:48 PM

If this is a parts searching thread, i have a critical trigger and need a stock trigger!!! will pay or THINK about trading (the critical is a much better trigger but i have always liked the scythe design)

xceolite · 10-15-2010, 10:26 AM

Sorry for the late reply werm, but it has 007 stamped on it.

werminator · 10-16-2010, 01:55 AM

Thanks Ceolite... Definitely not the one I am looking for... I know for sure that I am looking for a 690 bore with the old company logo and not the "007" I am looking very hard as I want to build an all custom timmy and anno the kit to match... or maybe just have my Quest annod and the kit to match... who knows... probably a custom species or alias build and 1 of a kind anno...