[Vampy]

not sure if It's a critical quest or just an 07 quest, but it sure is DAMN sexy. It's black to gold fade and it's one sharp looking gun. The serial is stamped as number 23 and I'm not sure how rare it truly is. It's apparently factoy anno and a 1/1 at that. It's got a lucky ace board, and stock bolt/bolt pin. the trigger is by crticial as well.

http://img827.imageshack.us/gal.php?g=hpim0328.jpg

With all that being said, there are a few questions I have:

The barrel has 4 bores stamped on it: .688, .690, 694, and .696. I'm confused by that...

Also, can someone confirm if this is infact a custom anno job?

And the last thing I would like to know: are parts from an OG quest compatible with the 07 milled quests?

[bomb_xero]

All quests are the same internally for the most part. Valve cores for the hpr and lpr may be different but that was also an issue before as they were switched out before critical took over the quest line.

As for the barrel... um good luck all my backs have one bore size stamped on them

Your gun is NOT a 1/1 any respectable anno company can easily reproduce those results. The only rare quests (as you were told in a previous thread) are the tanked quest with something like 3 ever being produced. The raiders quest which was limited in much greater number had the raiders badge on the sides of the gun (which was the same milling as the 07)

[Leafy]

anno doe snot make a gun 1of1. and I've definitely seen at least 3 of that anno at the same time.

[eatafetus]

take calipers and measure the barrel. Just to be sure. If its the .696 bore, you can send it out to be milled to accept freak inserts.

[xceolite]

Who would you recommend to do the freak boring?

[eatafetus]

odell paintball

http://www.odells-paintball.com/

[xceolite]

Thanks