PMI Pure energy LP kit questions
I have a few tanks that have LP kits. All of the kits are installed the same way, but they have some drastically different output pressures.
Some are outputting 450. some are 650.
My questions are:
Will reversing springs in the stack reduce the output pressure? for example if I install the shims like this: (()()()( instead of like this: )()()()()( will it cut down the pressure?
I I remove any of the spring stack will that reduce or increase the output pressure?
Will adding the supplied shims from the LP kit increase or decrease the actual output pressure?
I'd like to get these tanks all set up as close as possible to the same output. I'd be happy if they were within 100 psi.
Thanks for the help guys. I'm hoping a Tech sees this and can shed some light on this.
TEAM METHOD - D.O.G.'s Boy's
Custom A1 fly collector (Looking for wonderboy a1 fly)
WANTED: Blue angel A1 grips
Wanted - Angel A1/SB/AR:K parts and markers broken or working
WANTED: Deathstix kits in Purple: http://www.pbnation.com/showthread.php?t=4579745