Got mine today. Anything important I SHOULD or NEED to know about the gun?
Also the eyes are set to vision but when there is something in the breach the solenoid doesn't click. I know when the eyes are on and there is nothing in the breach both lights by the power button remain solid blue and when there is something in the breach one light is supposed to blink BUT mine remain solid blue regardless. When I pull the trigger the gun makes a beep sound from the speaker. Help?
Take off the eye covers and make sure you put your eye covers in place. Also take off the grips and look at the back of the board and make sure that the eyes are plugged in. What is happening is your eyes are in the wrong place or broken.
Does the beeping sound mean there is an eye malfunction? I'm doing this with no air nor paint. I'm just testing them out with my finger and hoping to activate the solenoid like if I'm firing with the eyes off, you know?
The laser eyes are visibly on and shining.... You think the problem is that I'm not Actually firing the gun?.... it shouldn't be that.... I'll see if it works noramlly tomorrow when I play, If not I'll jsut play with them off, I know the gun works with them off.
I'm wondering about this beeping sound? When I pull the trigger it just beeps...
Maybe your eyes aren't lining up or its the receiver part of the eyes. If the red light is on, the transmitter is working. The beeping sound is normal whenever you are trying to fire the marker with no ball in the breach. You can simulate a ball in the breach by sticking your finger down the feed neck to block the eyes and the blue light on the left side should start flashing.
probably just a bad eye ribbon. does the left blue led on the back of the grip flash when you block the breech? if not, then you need a ribbon. the beep is telling you that there is no paint in the breech when the trigger is pulled.
hope this helps,
Make Your .68 Caliber a Multi caliber Marker-.50 caliber Conversion Kits for Tippmann & GOG