Official Vanguard Creed Certified Tech thread!! (TECH QUESTIONS ONLY PLEASE)

Sick420 · 08-11-2010, 06:37 PM

Thank a lot. You really know your stuff.

tylr_byrd · 08-12-2010, 11:55 PM

I just received the new rammer, poppet and bolt today. I installed all three parts and aired up my system under the dry fire mode.

Ive noticed that when you push down on the bolt pin, the gun leaks down the barrel. I figured it was the bolt and quickly flipped my old bolt back in. Both bolts now do the same thing.

I have never noticed my bolt do this before.

Is this something that happens to all bolts? Or is this more likely the cause of a part installed incorrectly when I installed my upgrades?

Any leads as to what is causing this would be great.

Thank you in advance,

Taylor

SHOOTNPOO · 08-13-2010, 12:09 AM

When uninstalling the old ram it is poss that you nicked the inner valve body oring. And did not notice till installing the new ram.
Change the Inner valve oring That the rammer glide and seals on. Oring size is a 611.

If you have more questions please give me a ring.

Eric

HkOrbit · 08-13-2010, 02:25 AM

What other options do i have for settings such as dwell, lpr, and such other than the stock settings? The gun has over 30 cases through it.
Thanks,
Nick
P.s.- I love my creed!

SHOOTNPOO · 08-17-2010, 07:57 AM

Check out the Upgrade Thoughts thread, posted some settings that may help you out

MoogLe · 08-23-2010, 03:03 PM

friend of mine just bought a brand new creed and it seems to have a very tiny leak around the poppet area

is it likely just a replaceable oring? or a bad poppit?

Rey Mysterio · 08-23-2010, 03:06 PM

MoogLe · 08-23-2010, 03:36 PM

i was wondering the same thing, i dont know... how do i tell? its a brand new gun though so id assume its the new one

i tried dry firing it without the bolt to see if it went away and was just a dirty valve but it didnt help

SHOOTNPOO · 08-23-2010, 06:14 PM

Please contact our warranty department at.
Aggressivesports.net

As we will have you sorted out ASAP.
Please have the owner of the marker email us with
Serial# and information of the marker with the issues at hand and we will have this take care of right away.

Thank you
Eric Roysdon
Vanguard Warranty center

Sick420 · 08-23-2010, 10:08 PM

I just recently took apart my Creed cleaned and lubed. But now I got a small leak around the middle of marker like somewhere around inner valve body.But when I pull the trigger it goes away. It was fine yesterday when I aired it up and fired of a pod.
Thanks

SHOOTNPOO · 08-23-2010, 10:53 PM

You must of nicked the LPR body o rings.
Replace the 2 orings at the rear of the LPR body. They are 15x2 please go you oring sizing chart on the DVD toake sure you have the correct orings when replacing.

Thanks
Eric

alexhilgy16 · 08-23-2010, 11:11 PM

ok so my gun is leakng out of the breach really bad i change the oring.... i need a Manuel of were all the orings go etc i cant find one on the internet please help me

SHOOTNPOO · 08-23-2010, 11:40 PM

Do you have the DVD??????

If not here you go
If you need more help LMK. Take the Bolt out and Find out which hole in the breach the leak is coming from. And I can help you from there.

Thanks
Eric

Sick420 · 08-23-2010, 11:51 PM

Quote:

Originally Posted by SHOOTNPOO

You must of nicked the LPR body o rings.
Replace the 2 orings at the rear of the LPR body. They are 15x2 please go you oring sizing chart on the DVD toake sure you have the correct orings when replacing.

Thanks
Eric

Awesome! Fast & Easy Fix. Good I didn't have to go all they way to Valve Body. The only hard thing is getting more of those 15x2 O-rings without purchasing the whole o-ring kit because I have hundreds of the standard O-rings.
Thanks a lot Eric I am truly amazed of your knowledge.

alexhilgy16 · 08-23-2010, 11:56 PM

omfg thanks ur my hero!!! and no how do i get the dvdd

SHOOTNPOO · 08-23-2010, 11:59 PM

Quote:

Originally Posted by alexhilgy16

omfg thanks ur my hero!!! and no how do i get the dvdd

Email me, Tech@aggressivesports.net

Eric

SHOOTNPOO · 08-24-2010, 12:00 AM

Quote:

Originally Posted by Sick420

Awesome! Fast & Easy Fix. Good I didn't have to go all they way to Valve Body. The only hard thing is getting more of those 15x2 O-rings without purchasing the whole o-ring kit because I have hundreds of the standard O-rings.
Thanks a lot Eric I am truly amazed of your knowledge.

Email me as well...

shoebox_shocker_4x4 · 08-30-2010, 01:28 AM

my creed is leaking from under the bolt. Help? :]

SHOOTNPOO · 08-30-2010, 02:20 AM

Please be more specific!!
If you mean down the barrel out through the bolt then you have a blown oring on the poppet.

Lmk if you need more help

Eric

shoebox_shocker_4x4 · 08-30-2010, 02:42 PM

well its really not my gun so i just asked my brother what it was doing because i found this thread and thats what he told me. haha. but i'll check that. I'll probably be back for more questions

wyn1370 · 09-02-2010, 03:43 PM

how long should a fully charged battery last if unused
I have a bad habit of forgetting to charge it the night before I play.