[SonicCyborgPballer]

what is the easiest way to disolve the blue locktite?

Any help would be greatly appreciated.

[Sogamember666]

Heat gun or blow dryer

[SonicCyborgPballer]

Thank you i will go try that

[Sogamember666]

If not try using super glue remover. Just use an eye dropper to place small amounts.

What parts are you putting these on?

[SonicCyborgPballer]

im an idiot and put it on a trigger pin. last time i did it i put it on a cocking rod. and it was the red kind on the cocking rod......so i suppose im getting less stupid?

[Lauxes]

the red kind can be broken with heat also. hit it with a hair drier for about 4 minutes, and your gold.

[The Inflicted]

In a pinch, you can actually loosen loctite, temporarily, by putting MORE loctite on it.

[psycho91]

yep inflicted is right, and if there are no orings or anything that will get damaged you can boil water and put it in ther to get it undone, this is very important though, do not put the peice in there while the water is on the stove while it is boiling, take it off of the eye or cut the stove off then put it in there

[SonicCyborgPballer]

thanks i will try that. heat and acetone arent really working.

Will hot water do damage to anno?

[XiledHawaii]

red loctite on my empire on/off = MY WORST ENEMY
it started to leak so me and the gun techs tried to unscrew the leaking screw thing & it stripped completely w/ one turn i had to replace my on/off on that marker
the refs said that just hot water or a blow-dryer would work (as people have already said)
it shouldnt mess up the anno on the markers w/ better paint ( i can't vouch for spyders tho)