[G0DW1N]

K so I just picked up a luxe and my tank wont screw in all the way. Halfway in my reg hits the back of the grip frame and I cant screw it in. The gun didnt come with the dropback. Any suggestions on how I can fix this quick or do I need the dropback?

[ZerOxShadows]

Originally Posted by XxTexasfuryxX

You can take the back part of the ASA off and screw the tank in there. Then you have to screw the screws back into the ASA and frame. It takes a while and you wont be able to take off your tank unless you take off the ASA again but you can still do it.

I'm not sure how this works because I don't know how you're supposed to screw one of the screws in with the reg's threading in the way. But he did recommend this to someone and it worked out.

[G0DW1N]

thx man

[K-9]

Get the dropdown
And ditch the myth reg, theyre a terrible reg anyways

[ZerOxShadows]

Agreed. If you can't find a drop, invest in a Ninja reg. Those regs are solid!

[MstrKey]

I third that nothion. Those tiny myth regs don't make your gun shorter.....because you end up having to pull your ASA back to get the tank on lol. That negates the benefit of the shorter reg.

Plus the myth regs just aren't all that great performance wise. The older GA regs were much better.

[Ragin Cajun]

Id go with a ninja also. Great regs.

[PlumberNick9]

Or a CP, or any other regular reg.

[G0DW1N]

lol I fixed it, thanks zeroshadows. Ya all I did was screw my tank in first then put the asa on. Quick fix thx.

[Vale46]

When I had the Myth reg, the gauge would hit the bottom back of the trigger frame. One thing you can do is get the Ninja gauge because it is way smaller than the Myth's gauge. I got rid of the Myth reg though because it sucked, and now I have a Ninja regulator.

[dimonde10]

how do you put the tank on and then screw the asa in? the screws are unreachable once you screw the tank in..

i am having the same problem so any help would be appreciated

[Evac.]

Originally Posted by dimonde10

how do you put the tank on and then screw the asa in? the screws are unreachable once you screw the tank in..

i am having the same problem so any help would be appreciated

i've never worked with this but i think he just threads one screw in and twists the asa then threads the other screw in thats reachable with an allen when the knob is off

[XxTexasfuryxX]

Originally Posted by ZerOxShadows

I'm not sure how this works because I don't know how you're supposed to screw one of the screws in with the reg's threading in the way. But he did recommend this to someone and it worked out.

Thats creepy, and yes it works.

[G0DW1N]

Originally Posted by Evac.

i've never worked with this but i think he just threads one screw in and twists the asa then threads the other screw in thats reachable with an allen when the knob is off

yea thats exactly what I did.

[dimonde10]

nice got it to work. not sure how long it is going to hold until the back screw starts to come loose, but used it all day at practice and worked mint.

thanks guys