Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 04-18-2009, 12:05 AM #1
alphanu22
(◣_◢)
 
alphanu22's Avatar
 
Join Date: Nov 2003
Location: (-( SEATTLE )-)
Annual Supporting Member
alphanu22 is a Supporting Member
 has been a member for 10 years
alphanu22 is a Paintball photographer
alphanu22 works for a Paintball manufacturer
Frenzy 3.1 and 4.0 Board Manuals

Frenzy 3.1 Manual_2009 PSP Compliant

Basic Operation

To power on marker press power button once and release.

To turn off eyes pull and hold trigger while powering on board. LED will
flash white then release.

To power off marker press power button and hold LED will flash orange then
red and board will power itself off.

LED Indications

Both 2C and 4CR equipped markers:

Green (flashing) = Eyes on. No paintball staged in chamber.
White (flashing) = Eyes off.
Red (flashing) = Low Battery. Change battery immediately to avoid failure.
Orange (flashing) = Eye Malfunction. Most likely, paint from ball breaks
has blocked eye vision.

2C equipped markers:
Violet (flashing) = Bottom eye tripped. Paintball properly staged in
chamber.

4CR equipped markers:
Aqua (flashing) = Top eye tripped. Also use this to test top eye.
Blue (flashing) = Bottom eye tripped. Paintball properly staged in chamber.

Programming Options

Dip Switch 1 Fine Tune Cycle Delay

(Off ) = Fine tune cycle delay off.
(On) = 2ms fine tune cycle delay on.

Dip Switch 2 Programmable Debounce

Note: Stock Debounce setting is 6ms. Debounce is programmable from 1ms to
50ms.

To check current Debounce setting:
1. Power off board.
2. Set dip switch 2 to the (On) position.
3. Power on board.
4. LED will flash current Debounce setting then board will power itself
off.

To set desired Debounce:
1. Power off board.
2. Set dip switch 2 to the (On) position.
3. Pull and hold trigger while powering on board.
4. When LED turns white release trigger.
5. LED will turn off and then flash current Debounce setting.
6. LED will then turn green awaiting your response.
7. Pull trigger to set desired Debounce. Example: Debounce of 6 = 6
trigger pulls.
8. LED will flash back the Debounce setting you programmed then the board
will power itself off.
9. Set dip switch 2 back to the (Off ) position then reboot your board.

Dip Switch 3 Programmable Rate of Fire Cap

Note: Stock setting is Unlimited BPS. ROF setting is programmable from 5
to Unlimited.

To check current ROF cap setting:
1. Power off board.
2. Set dip switch 3 to the (On) position.
3. Power on board.
4. LED will flash current BPS setting then board will power itself off.

To cap ROF:
1. Power off board.
2. Set dip switch 3 to the (On) position.
3. Pull and hold trigger while powering on board.
4. When LED turns white release trigger.
5. LED will turn off and then flash current max. ROF setting.
6. LED will then turn green awaiting your response.
7. Pull trigger to set desired rate of fire cap. Example: 13 BPS max.
ROF = 3 trigger pulls.
5 pulls = 5 max. ROF
6 pulls = 6 max. ROF
7 pulls = 7 max. ROF
8 pulls = 8 max. ROF
9 pulls = 9 max. ROF
10 pulls = 10 max. ROF
11 pulls = 11 max. ROF
12 pulls = 12 max. ROF
13 pulls = 13 max. ROF
14 pulls = 14 max. ROF
15 pulls = 15 max. ROF
16 pulls = 16 max. ROF
17 pulls = 17 max. ROF
18 pulls = 18 max. ROF
19 pulls = 19 max. ROF
20 pulls = Unlimited ROF
8. LED will flash back the BPS setting you programmed then the board will
power itself off.
9. Set dip switch 3 back to the (Off ) position then reboot your board.

Dip Switches 4 and 5 Programmable Fire Modes

(Off ) (Off ) = Normal semi-automatic mode
(Off ) (On) = 3-shot burst mode (activated when 4 BPS is achieved)
(On) (Off ) = Ramping mode (activated when 4 BPS is achieved)
(On) (On) = Full-automatic mode (activated when 4 BPS is achieved)

Dip Switch 6 Programmable Dwell


Note: Stock Dwell setting is 8ms. Dwell is programmable from 4ms to 25ms.

To check current Dwell setting:
1. Power off board.
2. Set dip switch 6 to the (On) position.
3. Power on board.
4. LED will flash current Dwell setting then board will power itself off.

To set desired Dwell:
1. Power off board.
2. Set dip switch 6 to the (On) position.
3. Pull and hold trigger while powering on board.
4. When LED turns white release trigger.
5. LED will turn off and then flash current Dwell setting.
6. LED will then turn green awaiting your response.
7. Pull trigger to set desired Dwell. Example: Dwell of 8ms = 8 trigger
pulls.
8. LED will flash back the Dwell setting you programmed then the board
will power itself off.
9. Set dip switch 6 back to the (Off ) position then reboot your board.

International Programming Options

Frenzy 3.0 European Mode ( Removal of 3-shot burst and Full-automatic modes
)
1. Power off board.
2. Set dip switches 4 and 5 to the (On) position.
3. Pull and hold trigger while powering on board.
4. When LED flashes white press power button once, then LED will turn
aqua.
5. Release trigger and LED will turn green awaiting your response.
6. Pull trigger 10 times then wait until board powers itself off.
7. Set dip switches 4 and 5 back to the (Off ) position.
8. When you power on your board it will be locked in European Mode.
9. Use dip switch 3 to cap your BPS output in compliance with tournament
regulations.

Frenzy 3.0 Australian Mode ( Semi-automatic mode only )
1. Power off board.
2. Set dip switches 4 and 5 to the (On) position.
3. Pull and hold trigger while powering on board.
4. When LED flashes white press power button once, then LED will turn
aqua.
5. Release trigger and LED will turn green awaiting your response.
6. Pull trigger 13 times then wait until board powers itself off.
7. Set dip switches 4 and 5 back to the (Off ) position.
8. When you power on your board it will be locked in Australian Mode.
9. Use dip switch 3 to cap your BPS output in compliance with tournament
regulations.
__________________
BLASTech
|-[Instagram]-|-[Facebook]-|-[Twitter]-|
|-[BLAST Info]-|-[BLAST@FB]-|-[BL Direct]-|
alphanu22 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 04-18-2009, 12:05 AM #2
alphanu22
(◣_◢)
 
alphanu22's Avatar
 
Join Date: Nov 2003
Location: (-( SEATTLE )-)
Annual Supporting Member
alphanu22 is a Supporting Member
 has been a member for 10 years
alphanu22 is a Paintball photographer
alphanu22 works for a Paintball manufacturer
Frenzy 4.0

Turn on marker
push marker on button momentarily

Turn off marker
Turn marker off by pushing marker on button until RED LED then release

enable lock mode
1. marker off
2. push and hold lock button
3. push marker on button momentarily
4. RED LED lights up for 1.5sec
5. release lock button
6. LEDs flash rapid rainbow of colors
7. Turn marker off by pushing marker on button until RED LED then release

disable lock mode ( not in lock mode)
1. marker off
2. push and hold lock button
3. push marker on button momentarily
4. GREEN LED lights up for 1.5sec
5. release lock button
6. LEDs flash rapid rainbow of colors
7. Turn marker off by pushing marker on button until RED LED then release

change settings ( not in lock mode)
1. marker off , no air, barrel bag
2. pull trigger and hold
3. push marker on button momentarily
4. release ON button and trigger
5. LEDs flash slow rainbow of colors
6. momentarily pull trigger to move between program modes (LED will change
colors)
7. when desired program mode is set pull trigger and hold until LED turns
off
8. 1 sec delay
9. BLUE LED flashes current setting ( 1 flash = 1, 4 flashes =4)
10. RED LED turns ON, begin pulling trigger slowly for desired setting. ( 1
trigger pull =1, 3 trigger pulls = 3). Each trigger pull will cause LED to
turn ORANGE momentarly.
11. After trigger pulls wait 3 sec for RED LED to turn OFF.
12. BLUE LED flashes new setting ( 1 flash = 1, 4 flashes =4)
13. Marker turns OFF after 1 sec. RED LED will quickly flash

check settings ( not in lock mode)
1. marker off , no air, barrel bag
2. pull trigger and hold
3. push marker on button momentarily
4. release ON button and trigger
5. LEDs flash slow rainbow of colors
6. momentarily pull trigger to move between program modes (LED will change
colors)
7. when desired program mode is set pull trigger and hold until LED turns
off
8. 1 sec delay
9. BLUE LED flashes current setting ( 1 flash = 1, 4 flashes =4)
10. RED LED turns ON
11. Wait 3 sec for RED LED to turn OFF.
12. Marker turns OFF after 1 sec. RED LED will quickly flash

program mode
1. Green: firing mode. 1=semi, 2=ramp, 3=3 shot, 4=full auto
2. Violet: Debounce 1=1ms to 50=50mS
3. Aqua: Dwell 4=4mS to 25=25mS
4. Blue: Ball in place delay 1=off , 2=2mS, 5=5ms (slows marker ROF)
5. Red: Eye mode 1=force, 2 delay, 3=eye off 19bps, 4=eye off 11bps
6. White ( all led): ROF 5=5bps, 10=10bps, 20=unlimited
__________________
BLASTech
|-[Instagram]-|-[Facebook]-|-[Twitter]-|
|-[BLAST Info]-|-[BLAST@FB]-|-[BL Direct]-|

Last edited by alphanu22 : 06-04-2009 at 10:55 PM.
alphanu22 is offline   Reply With Quote
Old 04-18-2009, 07:07 AM #3
maful
 
 
maful's Avatar
 
Join Date: Aug 2008
Location: Austin, TX
sticky
maful is offline   Reply With Quote
Old 05-26-2009, 11:15 AM #4
cfl mike
Ron Paul = God
 
Join Date: Jun 2005
Location: The Land of Nod
cfl mike owns a Planet Eclipse Geo
cfl mike owns a Planet Eclipse Ego
cfl mike supports Team VICIOUS
cfl mike is for the Gunfight
cfl mike has achieved Level 3 in PbNation Pursuit
deffintly sticky (i dont think its in there) very useful kind of figured it out on my own though.
__________________
OLD FEEDBACK!

Why do people do this wanna-be hk thing? I mean hk people dont even play paintball, they just whine and start drama while wearing the ugliest stuff. Seriously you find light blue and pink to be attractive colors for your parents 1500 dollar investment (your gun/marker)? If you want to whine keep it off the field and save it for the internet; O wait! THATS EXACTLY WHAT YOU DO! Haha, if you don't play then don't whine.


I want your G6r parts and upgrades, sell them to me, because you wont get anything for them if you sell/trade them with the gun.
http://www.pbnation.com/showthread.php?t=3808906
cfl mike is offline   Reply With Quote
Old 05-26-2009, 11:32 AM #5
Stewey956
"It's Not A Shocker"
 
Stewey956's Avatar
 
Join Date: Jul 2007
Location: Austin, Texas
Stewey956 supports Cereal Killerz 2
Stewey956 donated to help Peyton Trent
Stewey956 supports Team VICIOUS
Stewey956 supports Bob Gurnsey
Stewey956 supports our troops
Stewey956 supports Pev's Paintball
So can I send in my 3.0 and get it updated to 4.0?
Stewey956 is offline   Reply With Quote
Old 05-26-2009, 12:27 PM #6
alphanu22
(◣_◢)
 
alphanu22's Avatar
 
Join Date: Nov 2003
Location: (-( SEATTLE )-)
Annual Supporting Member
alphanu22 is a Supporting Member
 has been a member for 10 years
alphanu22 is a Paintball photographer
alphanu22 works for a Paintball manufacturer
Keep in mind guys that the 3.0 Frenzys are DIP Switch Boards. The 4.0 Frenzys don't have DIPs.
__________________
BLASTech
|-[Instagram]-|-[Facebook]-|-[Twitter]-|
|-[BLAST Info]-|-[BLAST@FB]-|-[BL Direct]-|
alphanu22 is offline   Reply With Quote
Old 05-26-2009, 05:01 PM #7
Dustinkwon
~~~~IRONMEN FTW!!!!~~~~
 
Dustinkwon's Avatar
 
Join Date: Jul 2007
Location: 50 snake
Dustinkwon supports Team VICIOUS
Can I send in my 3.0 for the 4.0 for free???



Sticky this!!!!!
__________________
LNIB PROPHECY with QUICKFEED FOR SALE ONLY (CHRISTMAS SPECIAL) ***PICS AND VID!!!!***
http://www.pbnation.com/showthread.p...7#post69493277

RARE HP CROSSFIRE 45/4500 HYDRO: 1/07 (PICS AND VID!!!!) CUMMM AND GETT ITTTT
http://www.pbnation.com/showthread.p...6#post69493816

UL'D PM7 FOR SALE ONLY! (ORANGE BOLT and CP SLING!) (PICS AND VID!!)(FULL SETUP F/S!)
http://www.pbnation.com/showthread.p...8#post69494548
Dustinkwon is offline   Reply With Quote
Old 05-27-2009, 05:32 AM #8
SpyderOWNAGE
Super@PBR
 
SpyderOWNAGE's Avatar
 
Join Date: Nov 2004
Location: Arizona
SpyderOWNAGE donated to help Peyton Trent
Quote:
Originally Posted by alphanu22 View Post
6. White ( all led): ROF 1=11bps
Would that make all 4.0 boards not legal for PSP or is it actually 10.5 bps?
__________________
BearDown

www.APD-Direct.com - Arizona's only authorized dealer for the DLX Luxe
Fort Adobe Paintball Complex - Play on Turf

Green/Purple CCM Series 6 Pump + Gear Stolen!
SpyderOWNAGE is offline   Reply With Quote
Old 05-27-2009, 06:55 PM #9
tim2thousand4
Breakout Action Sports!
 
tim2thousand4's Avatar
 
Join Date: Apr 2002
Location: St. Louis
Annual Supporting Member
 has been a member for 10 years
tim2thousand4 is BST Legit
tim2thousand4 is playing at Living Legends VII
tim2thousand4 owns a Planet Eclipse Ego
tim2thousand4 has achieved Level 1 in PbNation Pursuit
tim2thousand4 supports DLX Technology
Tell me these "4.0" boards aren't the ones coming in the victory?
__________________
Please leave feedback where you are buying/selling. Thank you!

Bob long insight soft face bolts in stock now!!
Hottest new markers!!www.breakoutactionsports.com
tim2thousand4 is offline   Reply With Quote
Old 05-27-2009, 06:58 PM #10
gamer565
Read the manual!!
 
gamer565's Avatar
 
Join Date: Dec 2005
Location: OK
Annual Supporting Member
gamer565 is playing at Living Legends VI
gamer565 is playing at Living Legends VII
gamer565 posts videos on PbNation
gamer565 is reppin' sidebar 4 life
gamer565 has achieved Level 6 in PbNation Pursuit
gamer565 is one of the top 100 posters on PbNation
gamer565 is Boss
Quote:
Originally Posted by tim2thousand4 View Post
Tell me these "4.0" boards aren't the ones coming in the victory?
If you read the description of the victory, you would see if comes with a ryujin board.
__________________
Jolly Green (╯°□°)╯︵ ┻━┻

gamer565 is offline   Reply With Quote
Old 06-04-2009, 07:12 PM #11
SouthPark22
 
 
SouthPark22's Avatar
 
Join Date: Apr 2008
THE STICKY IS WRONG with respect to Frenzy 4 ROF settings... or at least it is according to the manual I have just received from Jason at BLAST. Range of ROF settings are from 5 to 20. 5 pulls = 5 flashes = 5bps... and up to 20 which is unlimited ROF.

From the manual: "5 pulls = 5bps Max. 10 pulls = 10bps Max. 20 pulls = unlimited ROF"
SouthPark22 is offline   Reply With Quote
Old 06-04-2009, 07:35 PM #12
kobu
U.S. ARMY
 
kobu's Avatar
 
Join Date: Apr 2008
Location: back state side
bob has free updateing for the boards ??
__________________
No Worries
kobu is offline   Reply With Quote
Old 07-08-2009, 04:15 PM #13
Anatolik
 
 
Anatolik's Avatar
 
Join Date: Feb 2009
Hi guys

Need help... need to configure rapper. The board is frenzy 4.0... in settings i put ramp mode and ROF 10bps... but the problem is that after stopping pulling trigger the marker shoots more than 3 shots((( first it was about 6-7 shots, i put debounce 40!! now it shoots only 3-4 after stopping pulling trigger... I dont need that to be shot after stopping...

what to do?? really need help, cause need marker this weekends...

Hope for you help...
Anatolik is offline   Reply With Quote
Old 08-04-2009, 12:16 PM #14
stikfa190
Keenan Prusank
 
Join Date: Aug 2008
stikfa190 plays in the PSP
stikfa190 plays in the APPA D4 division
which board does the victory have, is it one of these?
__________________
Chicagoland-Paintball.com
Mank$tar
stikfa190 is offline   Reply With Quote
Old 08-08-2009, 07:14 PM #15
AlmightyRuler
Vigilante English Teacher
 
AlmightyRuler's Avatar
 
Join Date: Feb 2007
Location: The Land of Confusion.
Quote:
Originally Posted by stikfa190 View Post
which board does the victory have, is it one of these?
Scroll up.
__________________
Some Invaluable Words of Wisdom:
A wise man's heart directs him toward the right, but the foolish man's heart directs him toward the left.
-Ecclesiastes 10:2
“If you're not a liberal at twenty you have no heart; if you're not a conservative at forty you have no brain.”
-Sir Winston Churchill
"Lousy Democrats."-Homer J. Simpson
AlmightyRuler is offline   Reply With Quote
Old 08-23-2009, 08:57 PM #16
Desertwulf
 
 
Desertwulf's Avatar
 
Join Date: Aug 2009
thanks for posting that. My rapper didnt come with any kind of instructions.
Desertwulf is offline   Reply With Quote
Old 10-17-2009, 03:40 PM #17
cfl mike
Ron Paul = God
 
Join Date: Jun 2005
Location: The Land of Nod
cfl mike owns a Planet Eclipse Geo
cfl mike owns a Planet Eclipse Ego
cfl mike supports Team VICIOUS
cfl mike is for the Gunfight
cfl mike has achieved Level 3 in PbNation Pursuit
4.0s i think are for the mtacs guys

edit- meant to post this a while ago lol
__________________
OLD FEEDBACK!

Why do people do this wanna-be hk thing? I mean hk people dont even play paintball, they just whine and start drama while wearing the ugliest stuff. Seriously you find light blue and pink to be attractive colors for your parents 1500 dollar investment (your gun/marker)? If you want to whine keep it off the field and save it for the internet; O wait! THATS EXACTLY WHAT YOU DO! Haha, if you don't play then don't whine.


I want your G6r parts and upgrades, sell them to me, because you wont get anything for them if you sell/trade them with the gun.
http://www.pbnation.com/showthread.php?t=3808906
cfl mike is offline   Reply With Quote
Old 10-22-2009, 12:44 AM #18
NightKreeper
 
 
NightKreeper's Avatar
 
Join Date: Jun 2002
Location: Springfield, Missouri
NightKreeper is a Supporting Member
 has been a member for 10 years
NightKreeper plays in the PSP
NightKreeper plays in the APPA D4 division
with 3.1, when adjusting the bps cap, what will pulling the trigger 1-4 times get you? and how do you get it to 10.5?
__________________
old feedback 31/0/0
AC 417
Kick'n Paintball Park
Planet Eclipse
G.I. Sportz
V-Force
Exalt
NightKreeper is offline   Reply With Quote
Old 04-15-2010, 11:56 PM #19
NightKreeper
 
 
NightKreeper's Avatar
 
Join Date: Jun 2002
Location: Springfield, Missouri
NightKreeper is a Supporting Member
 has been a member for 10 years
NightKreeper plays in the PSP
NightKreeper plays in the APPA D4 division
what is fine tune cycle delay?
__________________
old feedback 31/0/0
AC 417
Kick'n Paintball Park
Planet Eclipse
G.I. Sportz
V-Force
Exalt
NightKreeper is offline   Reply With Quote
Old 07-27-2010, 10:05 AM #20
jdog333
aka The Easy Mac Man
 
jdog333's Avatar
 
Join Date: Jan 2009
Location: CT
jdog333 plays in the PSP
jdog333 owns a Planet Eclipse Geo
jdog333 has achieved Level 1 in PbNation Pursuit
jdog333 has achieved Level 2 in PbNation Pursuit
I think my 3.1 frenzy is stuck in that semi auto lock. How do I unlock it? pm me with help please.
__________________
ASU
jdog333 is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump