So i'm thinking i'm going to get the cure 3 for my ego but i don't know which one to get it does not list the difference on the website so i thought id ask the fine fellas in the PE thread. maybe its a typo?
The cure 3+ bolt is newer and will accept "inserts" to affect the way the bolt cycles(faster,quieter,smooter and so on) but the inserts havent been released to the public. Go with the cure 3+ so when the inserts are available you can use them.
The cure 3+ bolt is newer and will accept "inserts" to affect the way the bolt cycles(faster,quieter,smooter and so on) but the inserts havent been released to the public. Go with the cure 3+ so when the inserts are available you can use them.
Thanks for the fast reply any idea when the inserts will be released? also will my ego still shoot w/o the inserts?
You do need an insert in there for it to work, but it comes with the standard one installed. The new inserts are shaped and designed slightly different to produce different results than the stock insert.
You do need an insert in there for it to work, but it comes with the standard one installed. The new inserts are shaped and designed slightly different to produce different results than the stock insert.
Correct. You will need an insert but it will come with one installed that should shoot about the same as a standered cure 3. So you will be fine until inserts are released that you can pick up as you please.
The insert included with the Cure3+ gives a curved air path from the inlet port, which should improve air flow, and hence boost velocity a bit. Consequently - depending on how the marker is tuned - you can either lower the dwell a bit for improved efficiency, or lower the HPR pressure a bit for a quieter, smoother marker, that is a bit softer on your paint.
Correct. You will need an insert but it will come with one installed that should shoot about the same as a standered cure 3. So you will be fine until inserts are released that you can pick up as you please.
