Originally Posted by waterdragon
now the question is what is a good pressure for the hpr and about how tight should the screw in the lpr screw...
Turn is way down until the bolt pressur is vey low - can push forward easily with you pinky finger, the turn the screw out until it hard to push forward - with pre '09's it shold be too firm to push with your pinky finger.
Adjust to where the gun is consistant and doesn't have shootdown. I recommedn starting with the dwell turned up a couple of miliseconds then after you get it shooting correctly turn the dwell low enough that neither the LPR or Inline has to change to keep consistancy and not have dropoff. Iy you really want to maximise efficiency then you can turn the dwell downto where the consistancy over the chrono just starts to jump around and then turn the LPR up.