 |
03-22-2010, 05:39 PM
|
#1
|
|
Bonus Balled Toucan Sam
Join Date: Oct 2009
Location: Chautauqua County, NY
|
Bt-4 Re-cocking issue Please Help!
Ok, been having this issue with my BT-4 E Grip for some time now. I've narrowed it down to the grip as I've replaced everything else and put the grip on another marker where it will do the same thing.
When firing, normally in Full auto or ramping etc, the gun will come un-cocked, where I will then have to re-cock it and then fire again, where it may shoot a few to several shots and then un-cock again.
Like I said, I've done the ASA trick, replaced the valve, orings etc, etc. I'm sure at this point it must be the grip. In fact, I've even upgraded to the APE board and it still does this so I'm thinking it must be the Sear not catching right? Any ideas?
|
|
|
|
03-22-2010, 07:22 PM
|
#2
|
|
Join Date: May 2009
Location: kingston, ontario, CA
|
take it in to your local shop
__________________
If paintball wasn't paintball, would it be tennis?
|
|
|
|
|
03-23-2010, 07:01 AM
|
#3
|
|
Join Date: May 2005
Location: PB fields of PA
|
Could be your sear just needs to be adjusted, try that first. But give the sear a good once over to make sure theres no odd wear on it. If there is then you might need to replace it. You can take it to the shop or if you have time, tools and skills replace it yourself.
__________________
Member of JOINT FURY Since 2008
Paint slinging monkey for the Fighting 5-0
Member of Rogue Element since 2006
Sponsored by: Rogue Ales ~
|
|
|
|
|
04-02-2010, 10:57 PM
|
#4
|
|
Im gonna go to Hawaii!
Join Date: Sep 2008
Location: NY
|
i got rid of that with a blue spring, polished internals and HPA instead of CO2
|
|
|
|
|
05-12-2010, 07:41 PM
|
#5
|
|
|
Make sure the front o ring on your bolt isn't damaged and polish the internals. This will solve the issue.
|
|
|
|
|
05-13-2010, 11:20 AM
|
#6
|
|
Moderator
Join Date: Feb 2007
Location: NY "9won4"
|
Quote:
Originally Posted by Capt'n Crunch
Ok, been having this issue with my BT-4 E Grip for some time now. I've narrowed it down to the grip as I've replaced everything else and put the grip on another marker where it will do the same thing.
When firing, normally in Full auto or ramping etc, the gun will come un-cocked, where I will then have to re-cock it and then fire again, where it may shoot a few to several shots and then un-cock again.
Like I said, I've done the ASA trick, replaced the valve, orings etc, etc. I'm sure at this point it must be the grip. In fact, I've even upgraded to the APE board and it still does this so I'm thinking it must be the Sear not catching right? Any ideas?
|
Does this only occur when firing paintballs or dry firing as well?
What kind of tank are you using? |
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
