[SRFox]

So I just got the TM15 Double Trigger. It boasts that it is "Easy to Install."

However there is no directions... I am assuming your crack the clamshell and it should be pretty easy but just wondering if anyone has any input.

[Whiteyboy]

I don't own a TM15 but from looking at the manual, the install should be pretty easy. Split the receivers open, lift the single trigger and guard out of place and replace with the new ones.

Trigger
The trigger can be removed by simply lifting it out of the right side shell.
When reinstalling it, make sure the trigger spring is seated correctly. See
the picture below for correct installation.

[SRFox]

Thanks, I appreciate it

[Whiteyboy]

Originally Posted by SRFox

Thanks, I appreciate it

No problem, let us know if you have any trouble or any more questions.

[mark1975]

Originally Posted by Whiteyboy

No problem, let us know if you have any trouble or any more questions.

Your TM-15 manual should have the full info.

[Whiteyboy]

Originally Posted by mark1975

Your TM-15 manual should have the full info.

In case you don't have one, TM5 manual.

[SRFox]

Finished this in about 20 minutes last night including adjustments to the trigger. Again I am amazed by the simplicity and quality of my BT marker. Simple to take apart and change this trigger and simply to put back together. I definitely dont miss the times of trying to hold the double little springs in on my A5's.

[Whiteyboy]

Originally Posted by SRFox

Finished this in about 20 minutes last night including adjustments to the trigger. Again I am amazed by the simplicity and quality of my BT marker. Simple to take apart and change this trigger and simply to put back together. I definitely dont miss the times of trying to hold the double little springs in on my A5's.

Glad you were able to install and adjust it.


Double springs? JCS stick trigger?