[Invertkid44]

hey guys, I just got a PGP and used it a bit the other day, then lent it out, and the kid who used it, had the Co2 stick in the tube, so he thought it would be a good idea to bang it off the ground to get it out... So overall he bent the bottom of the tube so the cap will no longer fit into it, and the threads are bent and probably need rethreading... I was wondering where I could go or who I could contact about having this fixed and having the problem with the Co2 cartridges sticking inside the tube upon cap release.

Cheers

[Drayven]

As far as the repair, look for a solid machine shop in your area...ask lots of questions, make sure they're good with aluminum and steel work. The one I fixed for a friend would have the co2 stick from time to time as well...mostly when shot too fast, or not drained enough....the freezing makes things tight...not a whole lot you can do for that.

[peachesaretasty]

What idiot would do that to Brass!? Its Brass!
Yeah, Machine shops, Glenn, etc.

[Exdee]

Step one: Hit kid.

Step two: Look for machine shop.



Alternate: Send to PPS or anyone who can help (on PBN, MCB, ******, etc)

[peachesaretasty]

To send to Palmer, do this:
Take box, include everything that goes with it. Write note "Heres my (gun type here). Make cool. (sign name and return address here)." Inclose as much money as possible. Palmer doesnt take Pesos or Shillings. Rubles are accepted IIRC.

[The Inflicted]

Originally Posted by Exdee

Step one: Hit kid.

Step two: Look for machine shop.

Is step 3 hit the kid again?