Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Thread Tools
Old 04-10-2010, 03:26 PM #1
spyderman_xtra's Avatar
Join Date: Jul 2006
Location: Charlotte, NC
spyderman_xtra helped look for balloons
spyderman_xtra is playing at Living Legends III
spyderman_xtra supports Bob Gurnsey
spyderman_xtra is attending Decay of Nations VI
06 Interceptor Question 's

I recently recieved an 06 Interceptor in a trade, and this gun is phenomenal.
I need to know a few things though.
#1. How do I adjust the velocity.
#2. My front block comes loose every now and then.
What can I do to fix this other than loctite?
Need to sell a lot of stuff(link coming soon)

Gearbagg sale please buy my stuff
LP Crossfire fresh Hydro looking to trade for smaller tank
Old School Feedback
"Originally posted by jwarrenjg: school takes priority...paintball you can play all your life."
spyderman_xtra is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Old 04-10-2010, 10:04 PM #2
95steeda's Avatar
Join Date: Nov 2006
Location: Santa Fe, TX
 has been a member for 10 years
Here is a site with a wealth of info for your gun.

For velocity, use the adjustment at the bottom of the HPR, assuming it's the stock HPR.
Set your LPR to 100psi, that's the one that is attached to the front block.
You should probably verify/set your board to stock settings, then work your way up from there, or at least make sure your dwell is set to stock. Changeing your dwell can also change velocity. But you should balance your regs first, then go to dwell.

As for your other question, not sure. But make sure you have a screw going into the reciever from the frame. It's right at the top of the trigger guard, next to the trigger. If that comes out it will seem like the front block is loose. Mine came out all the time until I put some blue locktite on it.

Hope this helps.
95steeda is offline   Reply With Quote

Thread Tools

Posting Rules
Forum Jump