Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 04-05-2010, 08:26 PM #1
ohio paintballer
 
 
Join Date: Mar 2010
Smart Parts Ion feed neck

I have a Smart Parts Ion and would like to put a clamping feed neck on it. Can the feed neck on it come off and if it does how do I do it.
ohio paintballer is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 04-05-2010, 08:44 PM #2
Pump Scout
Old gun,new gun,whatever
 
Pump Scout's Avatar
 
Join Date: Aug 2002
Location: Central Wisconsin
Annual Supporting Member
Pump Scout is a Mega Moderator
Pump Scout is a Supporting Member
 has been a member for 10 years
Pump Scout is BST Legit
It's threaded in place. Unscrew, replace with clamping neck.

For future reference, most gun manufacturers have specific forums a little further down the site.
__________________
WISCONSIN NAVARONE
Pump Scout's Curator's Corner thread
Inception Designs

Flying to events? Check out BHTP to protect your travel and your bags!

Last edited by Pump Scout : 04-05-2010 at 08:52 PM.
Pump Scout is offline   Reply With Quote
Old 04-06-2010, 12:44 AM #3
Phryxis
 
 
Join Date: Apr 2002
 has been a member for 10 years
It can be a serious pain to get a feed neck off...

You'll probably need a strap wrench, unless you're willing to crap up the stock feed neck.

I had a strap wrench and still couldn't get the feed neck off my IR3. I ended up drilling a hole through both sides of the feed, and torquing it off with an allen wrench.

And then it turned out the feed neck I had was too low to allow the breech to swing open. What a treat.

I eventually got one that worked, but let it be a warning, take it slow, look over each step, make sure it all will make sense before you do anything permanent.
Phryxis is offline   Reply With Quote
Old 04-06-2010, 06:48 AM #4
TekstyL
 
 
Join Date: May 2005
Location: PB fields of PA
The stock can be a bear to take off like Phryxus said a strap wrench and a hair dryer to lossen up the loctight worked for me.
__________________
Member of JOINT FURY Since 2008
Paint slinging monkey for the Fighting 5-0
Member of Rogue Element since 2006
Sponsored by: Rogue Ales ~
TekstyL is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump