Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 03-27-2010, 01:50 PM #1
Zhulu
 
 
Join Date: Oct 2009
09 slg air coming out of bleed

Hi

*edit*
When I screw on my tank, air spews out of the bleed button/back cap. the button is not stuck inside and pops out what is the problem? I've replaced the 020 oring on back cap and the two orings on my plunger. thanks

Last edited by Zhulu : 03-27-2010 at 04:12 PM.
Zhulu is offline   Reply With Quote
Old 03-27-2010, 02:11 PM #2
Zhulu
 
 
Join Date: Oct 2009
i'm trying to replace the bleed o rings... how is ANYONE suppose to do this with bare hands....! i've spent at least five times as much time trying to fix this horrible gun as i've actually played with it..
Zhulu is offline   Reply With Quote
Old 03-27-2010, 02:40 PM #3
sharpshooter242
 
 
sharpshooter242's Avatar
 
Join Date: May 2009
Location: Michigan
had a similar problem, shipped it out to dye and they fixed it, but other then that i love my slg
sharpshooter242 is offline   Reply With Quote
Old 03-27-2010, 02:47 PM #4
jferkin
Kenosha Baller
 
jferkin's Avatar
 
Join Date: Jun 2009
Location: Kenosha, WI
jferkin owns a Planet Eclipse Etek
Well it happens to me sometimes.. But make sure before you push your air in take a small allen key or something nd push it all the way in.. Sometimes its not all the way in and gets stuck in the one spot.
jferkin is offline   Reply With Quote
Old 03-27-2010, 03:02 PM #5
Zhulu
 
 
Join Date: Oct 2009
so i replaced all bolt o rings and pushed in my bleed button as far as it can go, then when attach my air cylinder, the bleed button pops back out, but it still leaks. when i detach my tank and I push in the bleed button, it takes very little effort and becomes depressed very easily. I used to remember that it took some effort to push the button in and a gasp of air would escape.
Zhulu is offline   Reply With Quote
Old 03-27-2010, 03:07 PM #6
Zhulu
 
 
Join Date: Oct 2009
jay i don't understand what you want me to do. please explain it again.
Zhulu is offline   Reply With Quote
Old 03-27-2010, 03:36 PM #7
Zhulu
 
 
Join Date: Oct 2009
uhg. i didn't everything the manual said and IT STILL DOESN'T WORK. this marker is getting on my nerves.
Zhulu is offline   Reply With Quote
Old 03-28-2010, 07:42 PM #8
Xtrophy
Pump-o-Matic
 
Xtrophy's Avatar
 
Join Date: Dec 2009
Location: Crawfordville, Fl
You tried the bleed o-rings themselves correct? The best way to get to them is to take the back cap assembly apart, if you did not do that already.

If you did not take the 050 rings off because you could not get to them let me know and I will tech you through it.

Let me know what you have tried and what you have not tried and I will do my best to help.

You can pm me on here to get ahold of me much easier than on this thread.

Last edited by Xtrophy : 03-28-2010 at 07:47 PM.
Xtrophy is offline   Reply With Quote
Old 03-30-2010, 07:22 PM #9
Pensacolaballer
Panhandle Assassin
 
Pensacolaballer's Avatar
 
Join Date: Jan 2007
Location: San Diego, CA
Pensacolaballer supports Cereal Killerz 2
did you lube the orings on the back cap?
__________________
Gearbag Sale
BJJ/MMA Shorts/Gloves
Pensacolaballer is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump