[ShadowGuy]

I have edited this first post to help those that find this thread.

Links to the previous threads.
http://www.pbnation.com/showthread.php?t=2756202 (July 9th 2008 - June 13th 2009)
http://www.pbnation.com/showthread.php?t=3124676 (June 13th 2009 - March 11th 2010)

We are building up differing versions of the Evil-M, a stacked tube version of the Viking that was never released by AKALMP.
Here are the current bits of important information if you want to follow along/mimic.

Body
Original Evil-M can be purchased from Destructive Customs or Logic Paintball. $200+
or
You can use a Merlin extrusion purchased from AirSoldierProducts.
$11.50

Ram/Valve/Hammer/Bolt/Screws
Can be pulled from a 2004 Viking
or
Purchased new from AKALMP




Solenoid
Humphrey HEA10A5-GL-101W
Purchased from AirSoldierProducts, comes with gasket.
$56

Trigger Frame
Will have to be built or modified from an existing frame.
Distance between screw holes is 5.25.
Known working frames are
G2 Frame by Blue Fork
Will have to have front screw hole extended and back hole opened slightly.


2006 Cyborg Frame
???

Detents/Eye Wires
Quad Detent kit from 2004 Viking, can be purchased from AKALMP or Destructive Customs.



LPR
Currently unavailable, but modifying similar designs are possible.

Vertical Adapter
Can be pulled from 2006 Cyborg, or autocockers using a layout of 3 holes with center screwed in.

Barrel is autococker threading, and feedneck is AKALMP/MacDev threading.

CAD Files (SpitleBug)
http://nickguyver.com/free/Evil_M_Rev.0.zip

Close to final pictures of mine...


http://nickguyver.com/images/paintba...g/img_3435.jpg


http://nickguyver.com/images/paintba...g/img_3436.jpg


http://nickguyver.com/images/paintba...g/img_3438.jpg

--------------------

Now for sale... http://www.pbnation.com/showthread.php?p=72555967

[not CrunchyMilk]

So how many M's are actually around and working now?

[Spitlebug]

Behold - Version 3 of this thread.

[ShadowGuy]

Mine is again 'almost done'... just need a 3mm led holder or switch to 5mm led and holder, and a dovetail. DC ended up doing all the wiring and final tweaking for me.

[TheePsycho]

Mine just needs some ego trigger parts, some bearing carrier and pin. Not entirely to sure as I don't own a ego and need to find a ego diagram of the trigger at least. Other than that mine is out for polishing and then its ready for anodizing, thinking of using pk selective for the anodizing.

[curly2k3]

Originally Posted by ShadowGuy

Mine is again 'almost done'... just need a 3mm led holder or switch to 5mm led and holder, and a dovetail. DC ended up doing all the wiring and final tweaking for me.

wait, is your's the one running the promaster harness and kila board?

[skinnyfatguy]

Mine has cycled. The bolt and frame are currently out for milling (detent slots and .015" off the frame in the noid area because Ken forgot to account for gasket). Then it's finally off to the anodizer.

[killerWGP212]

mines waiting for me to find a money tree for milling+anno

[The Others (Banned)]

[Ruler_Mark]

mine is still working

[Angel Killer]

I really wish I could start my project again. stupid school.

[BillyBob79]

Originally Posted by The Others

That's straight up sexxxy right there. Mind if I ask how much you invested in something like that?

[The Others (Banned)]

2k

[SoulCoffin]

i just realized somthing... the anno on shadowguy's evil m... arent those markings the timer on the suicide bomb thingy that the predator's use in the predator/avp movies?

[killerWGP212]

Yes they are

[BillyBob79]

Originally Posted by The Others

2k

If that's the case I don't think I'll be looking to build one anytime soon. Was the milling an anno a pretty big chunk of that or were the parts just that expensive?

[pntbllchaos8]

Originally Posted by BillyBob79

If that's the case I don't think I'll be looking to build one anytime soon. Was the milling an anno a pretty big chunk of that or were the parts just that expensive?

Ben has a tendency to do that.

He spent months designing and having pieces modified and made to fit. the frame is 1 off, the body is custom milled, tadao yakuza and whatnot. all that tends to add up quick.

[Spitlebug]

I've come to the conclusion that I wish SYSTEM would incrementally list all of the previous versions of a thread instead of just re-posting the original post.

[TheePsycho]

Originally Posted by pntbllchaos8

Ben has a tendency to do that.

He spent months designing and having pieces modified and made to fit. the frame is 1 off, the body is custom milled, tadao yakuza and whatnot. all that tends to add up quick.

That frame really wasn't that expensive, $250 really in total other than the custom milling there weren't any custom pieces made to fit, but that doesn't mean that the custom milling doesn't add up quick as I know mine is well over 2k before anodizing.

[richie_dee17]

i have about 1300$ put into my evil m as of right now, i still need to polish it up before i send it off to anno, but i can do that on my own.
i consider mine a budget evil m, i think i got the most out of it while spending the least amount of cash i could while keeping the quality of the build high.
once i part out the viking i used for parts, i will be a little better off, but as a custom build you have to expect to drop a ton of cash if you want a nice result.

specs on mine

tarantula milled body
droid board
07 borg vert asa
carbonfiber eye covers (to be make)
bob long gear drive asa
spd grips

parts new from destructive customs
-robtown valve
-lpr
-feedneck
-detents

parts from a donor 04 viking
-bolt and pin
-ram cartridge
-sidewinder
-wiring harness

parts from a donor b2k4 bushy
-t2 frame
-noid and gasket

still left to do
-polish and anno
-eye covers
-and gonna make some triggers from delrin when i get a chance

as of right now my gun shoots great, regs need to be broken in, but i'm not gonna put a lot of paint through it till i get the gun anno'd to minimize wear on the raw parts

[MeuroM]

Don't start me, mine's the budget EMM.. yep yep..