[jenglert]

i cant reprogram anything on my marq 7
yes ive seen and read the stickies and manual

it just wont go or do whats its saying it should

can anyone help

[IgnoranceInABag]

what board? im gonna assume you have the original frenzy flash. use the marq manual to program

[jenglert]

again ive tryed to use the manual but it dosent work ither
unless im not lookin at right spot in manual

[Ri0T]

It's probably not flashed. You can probably only switch settings via the dip switches, i.e. It's either uncapped or 15 bps, dwell is either 8 ms or 10 ms, etc. Don't look at the Frenzy 3.0 manual. Look in the Marq manual to see which dip switches do what.

[IgnoranceInABag]

we still dont even know what board you have

[jenglert]

Originally Posted by Ri0T

It's probably not flashed. You can probably only switch settings via the dip switches, i.e. It's either uncapped or 15 bps, dwell is either 8 ms or 10 ms, etc. Don't look at the Frenzy 3.0 manual. Look in the Marq manual to see which dip switches do what.

this seems to work but how would i drop the bps down to 12.5 or can i even do this

[xsv141]

Originally Posted by IgnoranceInABag

we still dont even know what board you have

.

[gamer565]

Originally Posted by jenglert

this seems to work but how would i drop the bps down to 12.5 or can i even do this

If its the frenzy 2.0 board, then you cant.

[jenglert]

Originally Posted by xsv141

.

well i dont know i bought it and the guy told me frenzy 3.0 but nothing from the 3.0 programing stuff will work

[IgnoranceInABag]

then you have the original flash. either uncapped or 15bps. call blast and get it flashed

[jenglert]

Originally Posted by IgnoranceInABag

then you have the original flash. either uncapped or 15bps. call blast and get it flashed

how long this normaly take like a week?

[IgnoranceInABag]

probably

[jenglert]

Originally Posted by IgnoranceInABag

probably

thanks for the help