[impulserrrrrr12]

i have a 2000 impulse with all the parts and a leaky asa.. i also have a body for a 2004 impulse that is anodized camo. i was just wondering wether or not i could use the board ,solenoid, valve, hammer , and all the other parts in the newer imp body . thanks for your thoughts.

[white trash]

yeah, you can use the 2k in the 2k4
while you are at it
go thru a reputable shop and get all new o-rings and put new o-rings on while your at it

[impulserrrrrr12]

yea thats what i had been plannin on but none of the shops around me got the right o rings. so i have been searching online. thanks for the answer though man

[carolinaragetc]

http://stores.ebay.com/Orings-Online

I ordered from them just a few weeks ago. Good quality. I think I got a x3 rebuild kit for like $8 dollars shipped

[impulserrrrrr12]

if i had a cp reg , stock asa, and tape worm. is it still ohk to gas up even though there isnt a way to turn the air down..ive been reading i should always turn the pressure down when gassing up and i dont think the cp regs have a way of adjusting pressure. thanks for your responses

[msonic]

Originally Posted by impulserrrrrr12

if i had a cp reg , stock asa, and tape worm. is it still ohk to gas up even though there isnt a way to turn the air down..ive been reading i should always turn the pressure down when gassing up and i dont think the cp regs have a way of adjusting pressure. thanks for your responses

You need to read the manuals of your products to educate yourself:

http://www.customproducts.us/downloa...inline_reg.pdf


That will show you how to service and adjust your CP regulator.

Step 31 shows you the screw to adjust velocity. Turning the screw In turns the pressure Down. Turning the screw Out turns the pressure Up

[impulserrrrrr12]

awesome. now atleast i can wait to get the lpr. thanks a lot for the help

[impulserrrrrr12]

and i am rebuilding the gun and i found a cheap cp near me so i wanted to make sure b 4 i bought it.