 |
01-22-2010, 10:14 PM
|
#1
|
|
|
Odyssey 03 electric Very Low Velocity
I have a Odyssey bought from ebay who's velocity I can't get to playing speed. I'd guess its doing maybe 200 fps even though I've got it to 400psi and max at lpr. Not sure whats wrong, any help is much appreciated.
|
|
|
|
01-24-2010, 02:32 PM
|
#2
|
|
|
Could it be the asa, since the reg only shows pressure from 280psi to 400psi.
Last edited by Moonspy : 01-25-2010 at 01:07 PM.
|
|
|
|
|
02-09-2010, 08:42 AM
|
#3
|
|
|
I guessing here!
Don't know much about this gun platform but If you got it used chances are the previous owner changed some board settings(dwell).I would try to reset everything to stock settings first!
|
|
|
|
|
02-24-2010, 08:59 PM
|
#4
|
|
Can't is the cancer of...
|
Are of you aware of the "sweetspotting"?
The reg might be too high, forcing the poppet closed prematurely.
Then again a T-board would be helpful in tuning your dwell, and I would check the lpr.
|
|
|
|
|
02-26-2010, 04:38 PM
|
#5
|
|
Join Date: Jul 2009
Location: USA
|
Set you pressure around 300, then tune your LPR regulator in front, try increasing pressure and see if your FPS increase as well
|
|
|
|
|
02-26-2010, 04:39 PM
|
#6
|
|
Join Date: Jul 2009
Location: USA
|
I mean increasing pressure on the LPR |
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
