Ok so i just bought a used Bob Long Protege. I aired it up, and put a fresh battery in it, and cleaned the gun as well as I could. When I put a hopper on I squeezed the trigger. Nothing happened. I can hear the gun clicking as if I was just shooting the marker with no air connected to it. (as in it registers the trigger pull and clicks, with no other effect)
Things that I have tried:
- Changed the battery
- Tried a different ASA/ macro hose from my other gun that I KNOW works with my tank, so I can rule out any issues with the ASA/ not getting air to the HPR.
- The board is seemingly working fine, no error LED colors or anything like that. I have also checked to make sure everything was plugged in (eyes/board)
- I have fired the marker with the eyes on and with them off, it leads to the same effect where the marker registers the squeezed trigger, but there is no movement of the ram/bolt.
- Checked the gun for leaks (none I can hear)
If anyone has any idea of what I need to try next it would be very appreciated. I am thinking it might be the HPR, but I really have no idea.
Thank you in advance...