Ok gents,
first things first. bought me a TM-15 and I fell in love with it almost immediatly. Other than the fact that my velocity is all over the place. 290, 270, 295, 250, etc... plus the accuracy seems to be a little lacking (due to the spikes??) I love the marker, minus those things, but really would like to figure out this problem.
Any ideas would be helpful. Im stripping her down in a bit for a good cleaning (as she took quite a few shots in the side during my last game today.. big gun=big target.....lol)
Thanks.
since the 15 is based off the mini (i dont know much about them other than that) if they have a velocity adjuster you could try backing that out, while lowering your pressure.
Well, if its new, its going to need some time to break in a bit before its going to get really consistent anyway. And, as mentioned, paint to bore match will have an effect on consistency. V-1 is pretty good stuff but its a smaller size at around .682-3", and I'm pretty sure the TM15's barrel is .688-.690". So that could be part of it. Another thing to always make sure of is that your reg pressure is at 200 psi. I've seen on my TM7 even a `10-20 psi difference in pressure can make a huge difference in consistency over the chrono. One last thing is to make sure you're keeping the barrel and gun as clean as possible. Make sure you wash your swab/squeegee after every game also because using a dirty on to clean your barrel doesn't get you very far.
yeah. I keep my marker really clean after the games, (Im a gun owner, a dirty weapon is a worthless weapon) I guess Ill try to break it in some more. Thanks guys.
