[azzxruller]

I just recently bought my DM4, has been working fine, worked great the last time i used it. But today i air it up and it starts leaking fron the back of the bolt/down the feedneck area. I have no clue what happend, i checked the o rings on the bolt they look fine to me. Could it be the LPR?

Any help is appreciated!'

Thanks

[¤Ñ裧óñ¤]

That very first o-ring on the tip of the bolt; I forget what number it is..Try replacing that one; then lube it generously...

[azzxruller]

just tried that...still does the same thing...
thanks anyways

[¤Ñ裧óñ¤]

try lubing your top hat o-rings..a little more or replace them..

[DlowS]

Originally posted by ¤Ñ裧óñ¤
try lubing your top hat o-rings..a little more or replace them..

i agree

[azzxruller]

replaced them, still the same

[¤Ñ裧óñ¤]

sorry man I cant think of anything else..

[azzxruller]

np, thanks for the help

[azzxruller]

all the o rings on the bolt changed still leaks

[elementdm4]

change orings they may look fine but the might not be also lube them well remember as you fire the gun you are also firing lube out of the front of the bolt don't be afraid to cake on the lube

[elementdm4]

change orings they may look good and make sure you cake on the lube cuz as you fire the gun you are also firing the lubeout the front of the bolt

[elementdm4]

your lpr might be to high turn in your lpr all the way then back it out 5 full turns that takes you back to the factory preset

[azzxruller]

i think i blew the noid, the noid wont click anymore

[Demon Imp]

Jeesh...what did you do to that poor dm4!!! lol.

Well you might want to consider calling up DYE and ask to talk to a tech or you could send it in and have them fix it.

[azzxruller]

im one step ahead of you hehe...sent it in today