dye nt trigger settings with no spring

chaingun25 · 10-23-2009, 12:15 PM

i just got a dye nt and took the spring out just wondering what a good setting for the sensitivity is

aapter · 10-23-2009, 12:19 PM

Magic Find All Button

koocxela · 10-23-2009, 01:38 PM

Quote:

Originally Posted by aapter

Magic Find All Button

you would have looked alot cooler if the google link actually brought up a link to down load the pdf file....

im not familiar with the stock dye boards but i would adjust the debounce until bouncing isnt an issue

chaingun25 · 10-23-2009, 02:14 PM

yea i planed on it just have to wait to pratice to get some more air

TRiiPiiN · 10-23-2009, 02:18 PM

Quote:

Originally Posted by chaingun25

yea i planed on it just have to wait to pratice to get some more air

I have mine set on 1 and it doesnt bounce really at all, like it doesnt take off on you is what I mean. I also took out the spring as well.

chaingun25 · 10-23-2009, 03:13 PM

mine bounces if u hold it in the right spot one of my team mates said to put it on 5 and not have shoot it yet i have about 1500 psi left and some paint iam going to mess with it tommrow and sunday at pratice

Spazdoc · 10-24-2009, 09:31 AM

I dropped in a lighter spring, and the tension is about midway between stock and no spring. I would like to remove the spring, and will try it this weekend.

Dkwak · 10-24-2009, 10:26 PM

removed spring and debounce 1 = works great! Rendition magnetic trigger kit possibly even better yet

Spazdoc · 10-24-2009, 10:38 PM

Quote:

Originally Posted by Dkwak

removed spring and debounce 1 = works great! Rendition magnetic trigger kit possibly even better yet

Did you drop in the magnet already, or planning to do it?

BTW, it's "Rotor."

Dkwak · 10-27-2009, 12:13 AM

thanks for the spell check and have not dropped in yet. Can't find it on ebay any more.

MHSG · 10-27-2009, 02:29 PM

Quote:

Originally Posted by Dkwak

thanks for the spell check and have not dropped in yet. Can't find it on ebay any more.

HERE YOU GO!

chaingun25 · 10-27-2009, 07:34 PM

citical makes a magnet kit for the nt its $15 i just cut my spring and now its better

TRiiPiiN · 10-27-2009, 07:56 PM

Here is a video of my NT shooting semi with no spring and trigger sensativity at 1.

http://www.youtube.com/user/POPgoesT.../0/eeT8JyjAiE8

FrmrSpecialist · 10-29-2009, 03:17 AM

Mine hasn't bounced yet with sensitivity at one. And with no spring it's amazing that there is still quite a bit of force to pull the trigger.. Perhaps Dye uses the 80 gram switches when we are all used to the non existant pull of 35 gram switches.. but who knows.

Spazdoc · 10-29-2009, 06:06 AM

Also, are those magnet kits simply replacing the spring? I would prefer a magnet that is set up like on the ego, in which is is use to pull the trigger forward from the front, rather than push from behind.

The resaon is that with the spring and magnet behind the trigger, the force is least when the trigger is at rest in the forward position and increases as you pull the trigger. With the magnet pulling from the front, the highest resistance is in the beginning,a nd decreases as the trigger is further pulled. IMHO, this would prevent bouncing better, since the strongest force is keeping the trigger pulled forward. I also like the idea of overcoming the force initially, and the resistance decreasing incrementally.

I am currently running without a spring, stock debounce, no problems with trigger running away while shooting paint. Now, if I dry fire and cover feedneck and barrel (to make it quiet) it will go full auto.