Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 09-12-2009, 05:24 PM #85
nightkast939
 
 
nightkast939's Avatar
 
Join Date: Mar 2005
Location: Knoxville, TN
nightkast939 plays in the APPA D3 division
I wouldn't recommend it. It doesn't seem to last long, well it didn't for me atleast. If you like haters get marmalade. It performed well for me at xball 5 and outlasted dow 33. My favorites are a toss up between marmalade and lurker just because of the longevity they provide between necessary maintenance.

Everyone has their own opinions on lube though. It'll work but won't last as long. Thats the basics of it.
nightkast939 is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 09-12-2009, 05:39 PM #86
haimynameistaylor (Banned)
suwoop
 
Join Date: Jan 2009
Location: French Decatur
haimynameistaylor plays in the APPA D3 division
i dont lube my guns normally i was just bored so i lubed it with hater stuff.
i was thinking about dropping some money on luxe stuff, i was thinking about getting a NOX bolt, new designz can, and violent trigger . any thoughts?
also how do i find out if i have a feather manifold or w/e?
haimynameistaylor is offline   Reply With Quote
Old 09-12-2009, 07:23 PM #87
UcLafan31689
 
 
UcLafan31689's Avatar
 
Join Date: Mar 2006
Location: Ohio
UcLafan31689 plays in the PSP
UcLafan31689 owns a Planet Eclipse Ego
UcLafan31689 supports Team VICIOUS
UcLafan31689 supports Team VICIOUS
UcLafan31689 supports Team VICIOUS
UcLafan31689 is an NCPA player
UcLafan31689 is Legendary
Quote:
Originally Posted by Ragin Cajun View Post
Oil is subjective. Depending on the oil you use some will work better than others. A thicker oil won't creep into the threads like a thinner oil. I used 3 in 1 oil to break mine loose.
I used gun oil. Probably too think now that i think about it. Ill try something thinner.
__________________
Miss ya Boss
UcLafan31689 is offline   Reply With Quote
Old 09-13-2009, 10:44 PM #88
UcLafan31689
 
 
UcLafan31689's Avatar
 
Join Date: Mar 2006
Location: Ohio
UcLafan31689 plays in the PSP
UcLafan31689 owns a Planet Eclipse Ego
UcLafan31689 supports Team VICIOUS
UcLafan31689 supports Team VICIOUS
UcLafan31689 supports Team VICIOUS
UcLafan31689 is an NCPA player
UcLafan31689 is Legendary
Got it to break finally today. Used a thinner oil to get into the thread better!
__________________
Miss ya Boss
UcLafan31689 is offline   Reply With Quote
Old 09-14-2009, 07:12 AM #89
Ragin Cajun
CLICK, CLICK, BOOM
 
Ragin Cajun's Avatar
 
Join Date: Dec 2001
Location: South Louisiana
Annual Supporting Member
Ragin Cajun is a founding member
Ragin Cajun is one of the top 1000 posters on PbNation
Ragin Cajun is a Forum Captain
Yep thinner oil will get into those threads. Not sure why they loctite them from the factory.
Ragin Cajun is offline   Reply With Quote
Old 09-14-2009, 07:44 AM #90
mr Rockwell
 
 
mr Rockwell's Avatar
 
Join Date: Apr 2008
Location: Croatia
mr Rockwell owns a Planet Eclipse Geo
Jep i done mine today. And I had trouble to brake loose that screw. When I screwed it in the loctite from the treads came loose and chipped. So jea thers loctite on the treads.

And regarding the Manifold screw i ajusted it like this.
"To make the gun softer on paint you just need to turn in the manifold screw. By doing so you will sacrifice some ROF. Usually what I do with this, set your board 2 BPS higher than what you will will be playing at and turn the screw in until you hear it starting to choke. Back the screw out a half a turn and drop your ROF and you should be good to go."

Works great but occasionally i get FSDO with the militia lube. Ill try hater souce next.
mr Rockwell is offline   Reply With Quote
Old 09-28-2009, 09:51 AM #91
timmykilla (Banned)
 
 
Join Date: May 2007
timmykilla donated to help Peyton Trent
Wow, these markers are actually pretty simple.
timmykilla is offline   Reply With Quote
Old 09-30-2009, 11:47 AM #92
orionz06
Turtle Wrangler
 
orionz06's Avatar
 
Join Date: May 2004
Location: Pittsburgh,PA
Annual Supporting Member
orionz06 is a Supporting Member
 has been a member for 10 years
orionz06 is an NCPA player
orionz06 is Immortal
orionz06 supports DLX Technology
Quote:
Originally Posted by mr Rockwell View Post
Jep i done mine today. And I had trouble to brake loose that screw. When I screwed it in the loctite from the treads came loose and chipped. So jea thers loctite on the treads.

And regarding the Manifold screw i ajusted it like this.
"To make the gun softer on paint you just need to turn in the manifold screw. By doing so you will sacrifice some ROF. Usually what I do with this, set your board 2 BPS higher than what you will will be playing at and turn the screw in until you hear it starting to choke. Back the screw out a half a turn and drop your ROF and you should be good to go."

Works great but occasionally i get FSDO with the militia lube. Ill try hater souce next.
I set mine to the max ROF, tuned the screw til it was slower than 10, and took it out to where it was above 15 and where i liked it... it will sustain about 16bps... then make sure to cap the board again
__________________
Penn State Paintball, Alumni #38
☆☆☆ The Departed© #38 ☆☆☆
Erie Fusion (original) #38

"Should you covet what you cannot afford. Maketh more money."
orionz06 is online now   Reply With Quote
Old 10-12-2009, 11:19 PM #93
hespelerhooligan
 
 
hespelerhooligan's Avatar
 
Join Date: Aug 2008
so i turned the manifold in 31/2- 4 screws in from flush, set my fsdo to 12, and my dwell to twelve. chronroing around 275. my question is why is my effiecincy so damn brutal , i can only get 2 and a half pods off a 3000-3500 fill...
hespelerhooligan is offline   Reply With Quote
Old 10-14-2009, 05:26 PM #94
digital sol
 
 
Join Date: Nov 2005
Location: Stl
digital sol supports DLX Technology
Quote:
Originally Posted by hespelerhooligan View Post
so i turned the manifold in 31/2- 4 screws in from flush, set my fsdo to 12, and my dwell to twelve. chronroing around 275. my question is why is my effiecincy so damn brutal , i can only get 2 and a half pods off a 3000-3500 fill...
more than likely you are in need of a rebuild, id go ahead and replace the o-rings on the firing assembly and the o-ring inside the firing can, clean it, lube it and put a case through it on the same settings, you should be fine after that.................
__________________
AkA Carbon
Custom Carbon Fiber Vinyl Wrap's
Stl Samurai Scenario Paintball
digital sol is online now   Reply With Quote
Old 10-16-2009, 02:14 AM #95
DC19
Doodlebug Sportz
 
DC19's Avatar
 
Join Date: Jan 2006
Annual Supporting Member
DC19 is a Supporting Member
DC19 supports DLX Technology
Replace the center inner firing can oring if you are having efficency problems.
__________________
DANNY - DOODLEBUG SPORTZ
The Premiere Paintball Facilities in Washington State.
LuxePbCentral - Your #1 Stop for Everything Luxe -
PM me for any Luxe / Parts! I can get custom Luxes for you!!!
PaintballNW.com - Local Event Coverage & Promotion!
PM me to request event coverage & make suggestions!
DC19 is offline   Reply With Quote
Old 10-16-2009, 03:42 PM #96
hespelerhooligan
 
 
hespelerhooligan's Avatar
 
Join Date: Aug 2008
i did and its working great, thanks boys
hespelerhooligan is offline   Reply With Quote
Old 11-10-2009, 01:30 PM #97
brntblu
 
 
Join Date: Oct 2009
Didnt even have to ask my question.
brntblu is offline   Reply With Quote
Old 11-12-2009, 12:50 PM #98
spike14
 
 
Join Date: Dec 2004
it seems to me that everyone is around the same settings on dwell 12 to 14 ms and three to four turns in on the manifold but fsdo ive heard from 7 to 20 on that setting will that cause my gun to use alot of air
spike14 is offline   Reply With Quote
Old 11-12-2009, 12:57 PM #99
spike14
 
 
Join Date: Dec 2004
i also spoke to a ndz rep he said what i thought that the bolt stick with the ndz can is a break in issue once u run enough paint through it that will stop and he also said they tested the gun with dow33 and thats what he recomended to use
spike14 is offline   Reply With Quote
Old 11-12-2009, 02:15 PM #100
spike14
 
 
Join Date: Dec 2004
my gun is set at 12 on dwell and three turns in on the manifold fsdo on 7 and 288-292 fps ill try this set up this weekend and post any changes on mon.
spike14 is offline   Reply With Quote
Old 11-20-2009, 04:42 PM #101
PolePosition
 
 
PolePosition's Avatar
 
Join Date: Oct 2008
Location: Memphis 10-a-key
Are there 2 screws inside the manifold adjustment? I tried adjusting my manifold screw today and I couldnt turn in past flush...so I took the screw out, looked inside, and there was another adjustment screw inside....is that how it is supposed to be? Do I turn that second screw in farther so that my top screw can be turned in?
PolePosition is offline   Reply With Quote
Old 11-20-2009, 04:46 PM #102
Ragin Cajun
CLICK, CLICK, BOOM
 
Ragin Cajun's Avatar
 
Join Date: Dec 2001
Location: South Louisiana
Annual Supporting Member
Ragin Cajun is a founding member
Ragin Cajun is one of the top 1000 posters on PbNation
Ragin Cajun is a Forum Captain
I have never seen 2 screws in there. Take both out and adjust only 1.
Ragin Cajun is offline   Reply With Quote
Old 12-10-2009, 05:19 PM #103
Felix_Trent
 
 
Felix_Trent's Avatar
 
Join Date: Mar 2009
its a 0.050 allen key
__________________
New Orleans Rush #69
http://www.pbnation.com/showthread.php?t=3258159
Aggen it up since '91!
[A][G][G]
Reppen tha Razta Splazh Luxe
Felix_Trent is offline   Reply With Quote
Old 01-27-2010, 05:52 PM #104
MoB StronG
 
 
MoB StronG's Avatar
 
Join Date: Aug 2009
Location: WestSide! CALi
Any updates on fsdo? My friend keeps his at 20 to make sure he has no drop off... But does it use up more air? I'm not sure where to put my fsdo!
__________________
R.I.P Joey Baars

"If you can't find somethin' to live for, you best find somethin' to die for.” -Tupac Shakur
MoB StronG is offline   Reply With Quote
Old 01-27-2010, 06:10 PM #105
digital sol
 
 
Join Date: Nov 2005
Location: Stl
digital sol supports DLX Technology
Quote:
Originally Posted by MoB StronG View Post
Any updates on fsdo? My friend keeps his at 20 to make sure he has no drop off... But does it use up more air? I'm not sure where to put my fsdo!
the colder is is and newer the gun/o-rings the higher you"ll want to set it to ensure you wont have any bolt stick....id recommend starting the fsdo at 12ms and raising it until the bolt stick stops...then raise it 2-3 more ms just to be safe.....

during the summer i keep mine at 8ms how-ever during the winter i raise it to 14-16ms, the amount of air lost is minuscule and wont be noticed..better to be be safe than sorry' when the match start's
__________________
AkA Carbon
Custom Carbon Fiber Vinyl Wrap's
Stl Samurai Scenario Paintball
digital sol is online now   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump