Hey guys my LPR is having gauge problems... I air it up and everything but the LPR gauge doesn't read anything. I looked at the manual and took the LPR apart. One thing i noticed that was out of the ordinary was that part number 6 in the manual( the LPR washer) was not there. In its place is what looks like the washer without the hole in the middle. Its weird because i haven't had the marker that long and only used it a few times so I hadn't taken the LPR apart yet. Every time i played it worked fine. Now, I can get it to fire and that but the gauge reads well bellow zero and adjusting it does nothing. I'm using a cp on off and a cp shorty reg if that helps. Thanks for your help guys.