 |
09-02-2009, 02:11 PM
|
#1
|
|
|
new mini new problem
hey i just got my mini yesterday and i hooked up my nitrous to it, it was leaking through the silver cap in the reg but fixed that quickly then it started to leak from the hole in the back of the reg
its distant but u can see that small hole |
|
|
|
09-02-2009, 02:12 PM
|
#2
|
|
|
and i tryed 2 nitro tanks so it could be the gun or the tanks could be busted
|
|
|
|
|
09-02-2009, 04:00 PM
|
#3
|
|
aka Melonhead
Join Date: Sep 2008
Location: West Michigan
|
If its leaking from the hole in the back of the reg that usually is a bad tank o-ring I believe. When it is leaking from the silver cap on the bottom that means your reg is set to too high of a pressure and it is bleeding off the excess to protect the internals of your marker.
__________________
Team IYAOYAS
|
|
|
|
|
09-02-2009, 08:17 PM
|
#4
|
|
FelizNavidon't
Join Date: Nov 2006
Location: Louisville, Kentucky
|
Quote:
Originally Posted by deaton
If its leaking from the hole in the back of the reg that usually is a bad tank o-ring I believe. When it is leaking from the silver cap on the bottom that means your reg is set to too high of a pressure and it is bleeding off the excess to protect the internals of your marker.
|
This man pretty much has it summed up. Check your rank o-ring, even if it looks fine I would suggest replacing it. Let us know if you get it fixed, if not we can go form there and try to figure it out. |
|
|
|
|
09-02-2009, 09:24 PM
|
#5
|
|
|
you guys were far past helpful figured out everything in 2 seconds it was the o rings on both tanks, it was so weird though because i didnt expect both rings to be broken, but right after that i went and got a dye rotor so im hoping nothing goes wrong from here because im about to buy a 50 cu ninja tank.
once again sorry for the long response but im so happy it works
|
|
|
|
|
09-02-2009, 09:31 PM
|
#6
|
|
FelizNavidon't
Join Date: Nov 2006
Location: Louisville, Kentucky
|
No problem at all. However you might want to check inside your asa to make sure that there is no metal that is sticking out and possibly causing the o-rings to break.
|
|
|
|
|
09-02-2009, 10:10 PM
|
#7
|
|
|
nah i dont think there is cause i tryed my brothers nitro and it runs flawlessly
|
|
|
|
|
09-02-2009, 10:12 PM
|
#8
|
|
FelizNavidon't
Join Date: Nov 2006
Location: Louisville, Kentucky
|
Awesome, glad that you got it all working. Let us know if you have any problems and we can help you out.
Also, just to check; What is your pressure set at now?
|
|
|
|
|
09-02-2009, 10:22 PM
|
#9
|
|
|
i chagned it to exactly 200 it was around 150 before, i dont understand why they make the gauge to 600 if limit is 200 but hey if it works it works
|
|
|
|
|
09-02-2009, 10:26 PM
|
#10
|
|
FelizNavidon't
Join Date: Nov 2006
Location: Louisville, Kentucky
|
You can order 300 PSI gauges from here, it's part number 62. |
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
