best dwell setting

pandem1c · 08-30-2009, 09:24 PM

i just put a 360 QEV in my ion and was wondering if anyone knew the best setting for the dwell.

SpyderPB819 · 08-30-2009, 10:20 PM

The stickies do.

hypforlife32 · 08-30-2009, 10:58 PM

every ion is different. do u have an aftermarket bolt? this is posted everywhere but ill still help you. my ion did a good dwell at 16. but that doesnt mean yours will. start from the bottom and slowly go up until it starts cycling. then go up a few over that. that should set u a good dwell. start at 10 and then slowly go up. if it barely does anything jump up about 4 then try that. then go up 1 and so forth.

pandem1c · 08-31-2009, 09:39 AM

i have a stock bolt. but i put it at 16 worked good went couple higher and couldnt get rebound working. so i lowered to 17 and works perfect. thanks

hypforlife32 · 08-31-2009, 02:42 PM

just ot warn you since u have a stock bolt u will cause alot of wear on the back oring. i would highly suggest getting a new bolt sometime soon.

openingact · 08-31-2009, 03:55 PM

Quote:

Originally Posted by hypforlife32

just ot warn you since u have a stock bolt u will cause alot of wear on the back oring. i would highly suggest getting a new bolt sometime soon.

what? I'm sorry, but unless I'm reading this wrong or something this statement is false.

pandem1c · 08-31-2009, 06:01 PM

thanks for the tip. i did plan on buying a new one here soon plus a new board. prolly that Virtue OLED board plus a couple other things.

hypforlife32 · 09-01-2009, 01:07 PM

no problem