[Kanvass]

Originally Posted by crazyfoolx311

you think that could be it??

I'm sure of it. Put the spring in the hole in the back and see for your self.

[HarryTBags]

whadda you got me on a pay-no-mind list kid?

[crazyfoolx311]

sorry bro i told you i wasnt very gun smart ........anyways i think i found out were to put the spring ....IS IT IN THE LITTLE DENTED CIRCLE IN BACK OF THE POPPET INBETWEEN THE POPPET AND THE BACK CAP VELOCITY SCREW??? and for some reason when im using my almost dead energizer with the eyes off it clicks .......but when i use brand new duracells it doesnt click or maybe it is but it isnt that loud........ someone please help i wanna play tommorow

[crazyfoolx311]

and imtrying to reset the noid ........ is it 50 trigger pulls with the eyes off??

[kean]

"If the problem persists, reset your solenoid by following the steps bellow.

Take the top three phillips head screws out off Solenoid Cap. (Make sure to press down hard to avoid stripping screws. If the screw get stripped you will have to buy a new Solenoid.) Next pull the piston out which is held in by a magnetic force and check the seals on both the bottom and top of the piston. They should be flush with the rest of the piston if not grab a small allen key and push the seal in and pull the allen key out until it goes back to flush position. – (originally posted by cjs9485)"

But honestly if you have a new poppit I would look into replacing all the orings on the bolt and bolt guide if you haven't already. That would be my next guess.

[Darkwulf]

Harry told you how to reset it on the first page.

[crazyfoolx311]

ok just got no leak in my gun!!!!!!!!!!!!!! REAL LATE BUT IM EXCITED!!! but when i took it out to fire it balls are just barely popping out of the barrel...... is this due to my new spring poppet.... just to make sure if i put the poppet in right its ........ poppet spring... then the velocity knob?? right???

[OkBaller]

Originally Posted by crazyfoolx311

ok just got no leak in my gun!!!!!!!!!!!!!! REAL LATE BUT IM EXCITED!!! but when i took it out to fire it balls are just barely popping out of the barrel...... is this due to my new spring poppet.... just to make sure if i put the poppet in right its ........ poppet spring... then the velocity knob?? right???

Ya, screw the back cap out to up the velocity. I pretty positive its out. Just play with it.


Mine is doing the exact same thing. And I have the old poppet. Problem is, Boss is sold out of them.. I'm kinda screwed..

Edit: Boss has the poppets back in stock. $20 shipped though.

[crazyfoolx311]

so i take out the knob , or screw it in ??? and start dry firing to wear the spring down???

[xRASHx]

Are you using a high pressure or low pressure tank? CounterClockwise for velocity increase

[HarryTBags]

Originally Posted by crazyfoolx311

so i take out the knob , or screw it in ??? and start dry firing to wear the spring down???

if it's in all the way, back it out half of a turn and start there. only adjust more over a chrono if needed.

[crazyfoolx311]

harry i tried that i went up and down the velocity knob, but still it doesnt work out for me im still getting like a 3 foot ball drop.... i really think its because i need to wear down the spring but dont wanna try just yet because i only have 1500 psi left and they say wearing down the spring can take 2 tanks of dry firing........anyone think the problem can be something different??

[HarryTBags]

it's not the spring. the spring only returns the bolt, it won't affect velocity.

check your dwell, check your battery again, try replacing the poppet o-ring.

[Default121]

Crazy where are you at in Texas? If its near by San Antonio I wouldn't mind helping you trouble shoot.

[crazyfoolx311]

the battery is brand new but i replaced it with another new one.... i dont have a o ring for the poppet. but the poppet is brand new. the dwell?? whats that?

default are you from lackland i went there like a week ago with my gun and all i was hoping to go to the proshop in san an but no deal... im stationed at dyess afb in abilene, tx ....... it sucks balls here... no paintball shop.. academy and online is my source of paint. the base field is just rec ball.the team im with is pretty good were pretty much the only team in town...and theres two other teams about a hour in ahalf away... im hoping to get out of here soon

[crazyfoolx311]

i got fed up and switch back to the old poppet to see if that works and it did!!! im back to shooting ropes again... THANKS GUYS !!! you really helped out alot

[xpocad]

Crazy fool Loves the cack!!!
Glad you finally got it running Ernestito!!

[FuzionF88]

thats great that you fixed your mini. you should be alot more confident in your fixing abilities. When Im fixing something, I know what the settings and what everything looked like before I had the problem, and I take these things and check to see what has changed. and If I see something diffirent, I change it, and boom, im back in the game! And if you ever need help with something, we here on pbnation will do the best of our extent to help. For me, every problem I have ever had and i couldnt do by myself. Pbnation was there with tons of help!

[JamieTurpin]

Originally Posted by Cheddar_Bob

Try this then, It is in the stickies...http://www.pbnation.com/showthread.p...&post=50676731

This thread is very useful Thanx

[mulishousM]

There was no need to revive a thread this old