 |
08-23-2009, 08:41 AM
|
#1
|
|
|
xe barrel leak need help please.
Changed all o-rings and still leaking down barrel help!!! 
__________________
looking 2 start
|
|
|
|
08-23-2009, 01:27 PM
|
#2
|
|
Speed play player
|
I don't know what to say have you tried a new barrel
|
|
|
|
|
08-23-2009, 01:40 PM
|
#3
|
|
Dark Side Donut Master
Join Date: Sep 2007
Location: Fort Drum, NY
|
usually the leak down the barrel is caused by the inside oring on the bolt stop or the sail oring. check those again.
|
|
|
|
|
08-23-2009, 03:42 PM
|
#4
|
|
|
changed all o-rings and tried another board
__________________
looking 2 start
|
|
|
|
|
08-23-2009, 04:05 PM
|
#5
|
|
Dark Side Donut Master
Join Date: Sep 2007
Location: Fort Drum, NY
|
how much air you have inthe tank?
|
|
|
|
|
08-23-2009, 06:00 PM
|
#6
|
|
Join Date: Jun 2009
Location: Valley Stream, NY
|
check the front banjo fitting, and regulator oring. Also might want to see if barrel has o-ring popped or missing.
Last edited by nycelitemaster : 08-23-2009 at 06:07 PM.
|
|
|
|
|
08-25-2009, 03:44 PM
|
#7
|
|
Wh4t
Join Date: Jun 2009
Location: Canada
|
Mine does this to, but only when I run out of air. Tired replacing everything in it and nothing helped. Hasnt effected the preformance, so I didnt bother trying anything else.
How much air is left in your tank when its leaking?
__________________
CCM T2 Red/Black
PE 50/45
Black I4s w/ Gold Lense
Black Rotor
|
|
|
|
|
08-25-2009, 05:26 PM
|
#8
|
|
|
I had an Ion that did this as well. Never could figure it out. The XE I picked up last month does not have this issue? Maybe a flaw in a certain batch?
|
|
|
|
|
08-25-2009, 05:31 PM
|
#9
|
|
newb to dm3
|
is your reg letting enough pressure into your gun?
|
|
|
|
|
08-26-2009, 03:36 PM
|
#10
|
|
|
reg gauge is reading 200 psi like i said replaced all o-rings and changed out complete board (hoses also) still leaks . The bolt goes forward as soon as you put air to it
__________________
looking 2 start
Last edited by djkion : 08-26-2009 at 03:43 PM.
|
|
|
|
|
08-26-2009, 04:11 PM
|
#11
|
|
Livestrong FTW
Join Date: Mar 2006
Location: Canada
|
|
|
|
|
|
08-27-2009, 07:05 AM
|
#12
|
|
|
mine did this after i changed out the body. the rear frame screw was causing the problem. maybe try unscrewing it a little and air it up? can you push the bolt back and stop the leak? and when you push it back, does it stay back?
__________________
"Originally posted by PBMT: Oh, and btw, you worrying about grammar on internet forums is like watching a special olympics race judge yelling at a contestant for going outside of his lines on the track...no one cares and you look like an idiot doing so."
|
|
|
|
|
08-29-2009, 08:24 AM
|
#13
|
|
|
no and it leaked with the grip frame off
__________________
looking 2 start
|
|
|
|
|
08-29-2009, 08:38 AM
|
#14
|
|
spuggles
Join Date: May 2005
Location: NY
|
Is it possible that you missed the inner breech o-ring?
It's right behind the feedneck inside the breech.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
