So we all know that gripping that damn plug is kinda a PITA. Forget about trying to torque it off when you want to change a 12 gram under pressure. I came up with this little mod to help both of my problems with the plug.
Basically all I did was run down to the hardware and picked up a shoulder bolt and appropriate drill and tap. Doing this gives a handle that makes turning the plug so much easier. I've also noticed through a day of play that I don't even need to look at the plug positioning any more and can keep focused down field as I change 12ies.
As you can see in this pic the bolt I used hangs down a little below the rail so holstering may be a slight issue. I did buy shorter bolts to switch out for this reason. That being said I use this as a main without a holster so opted for the longer bolt for ease of grip