Diablo Wrath help!!

Boatacious · 05-20-2009, 03:36 PM

I am trying to fix this gun. It is not firing at all so my brother opened it up and switched around the wires on the board. What is the order of colors that should be? Also any other help would be nice

EDIT: Also does anyone have an online manual? I cant find one

FearMyWrath · 05-21-2009, 08:26 AM

http://www.paintballsolutions.com/pd...nual_wrath.pdf

AirSin2000 · 05-21-2009, 11:28 PM

The board has been marked for the proper wires. Just follow the wires from the part and plug the connecter to the board.

Boatacious · 05-22-2009, 10:54 AM

Okay so i think i connected everything right. Now the solenoid wont work, it clicked for like ten shots and stopped

AirSin2000 · 05-22-2009, 11:44 AM

Check your battery.

Boatacious · 05-22-2009, 12:50 PM

replaced it already with a rayovac

AirSin2000 · 05-22-2009, 01:08 PM

Check the wires, you could have broken one to the solenoid. Try replacing the battery again, just to phaze out that it could be the battery.

Boatacious · 05-22-2009, 01:25 PM

just cahnged the battery to a rayovac ultra pro, clicked once and stopped

AirSin2000 · 05-22-2009, 07:49 PM

Check the spot on the board and make sure the solenoid is plugged in where it says, "SOL"

Boatacious · 05-23-2009, 01:09 AM

yes its the first one. the thick yellow one in that one...

AirSin2000 · 05-23-2009, 01:19 AM

Hm, I'm thinking a broken wire or two to the solenoid.

Boatacious · 06-04-2009, 01:44 PM

How much are new solenoids... Is it even worth it? this'll be a back up to my ion because i just rec ball and woods ball and let other people use my guns... can i pull a solenoid off another gun?

AirSin2000 · 06-04-2009, 03:40 PM

Like 30 dollars. Whether it is worth it is up to you.

vnandez · 06-08-2009, 11:39 PM

I am at my wits end with my AR-1. The gun has been stripped down, lubed, and put back together because b/c it kept blowing out the LPR hose. Now the HPR is not controlling the air flow and the gauge will show constant increase in pressure no matter how i turn the HPR. I dont know if the stock HPR is broken or if the LPR is. I can get it to fire if i just allow enough air in from my adjustable on/of asa but its crazy to shoot this thing like that. I would like to get this gun into working condition istead of just being a paper weight.
I have also read the Wrath sticky's and have seen the Youtube video on maintenance on the wrath and still I cant figure this gun out. What can I do?

AirSin2000 · 06-08-2009, 11:40 PM

I can take a look at it if you would like. Send me a PM.

FearMyWrath · 06-09-2009, 08:22 AM

Quote:

Originally Posted by vnandez

I am at my wits end with my AR-1. The gun has been stripped down, lubed, and put back together because b/c it kept blowing out the LPR hose. Now the HPR is not controlling the air flow and the gauge will show constant increase in pressure no matter how i turn the HPR. I dont know if the stock HPR is broken or if the LPR is. I can get it to fire if i just allow enough air in from my adjustable on/of asa but its crazy to shoot this thing like that. I would like to get this gun into working condition istead of just being a paper weight.
I have also read the Wrath sticky's and have seen the Youtube video on maintenance on the wrath and still I cant figure this gun out. What can I do?

im having the same problem with mine. mine will some times out of now where just drop pressure all together. still plenty of air in the tank but the guns gauge is 0. im bout ready to sell both wraths and get something else.

AirSin2000 · 06-09-2009, 10:44 AM

Hm, that could be a multiple of things, including your tank.

FearMyWrath · 06-09-2009, 03:05 PM

couldnt i just rule out the tank by throwing it on another gun?

AirSin2000 · 06-09-2009, 04:57 PM

Yeah. Do you have an on/off for an asa?

FearMyWrath · 06-09-2009, 04:57 PM

currently on the gun, no.

AirSin2000 · 06-09-2009, 04:58 PM

Ok, then try your tank on another marker.