my one quest body (i have two) has scratches on the inside and so does the gm bolt that was used in the gun (see pics).
When I got to air it up the bolt sticks fowards and air gushes out the lpr and breech. Is this caused from the scratches? Or is it something else like the noid?
I have tried different o-rings and lube.
I have set the lpr to zero and slowly turn it in and it does the same thing.
I have tried different batteries.
I have replaced the lpr valve core
I have opened up the noid to see if it was damaged and didn't see anything
I have the was board. *side note: is the noid supposed to click with the quests when you turn off the eyes and don't have any air in the gun? I know all the other guns that I have had I can hear the noids click.
I have run out of ideas and am tired of seeing it sit around so i'm coming to you guys for help