hey everyone, my defiant 2 is still messed up. it will not air up but instead just lead straight out of the top where the bolt is and the side near the solenoid. i think that it may be the ram but not sure becuase i put on my lpr pressure gauge wher the ram goes and i can air it up then and change lpr settings, not sure if that has anything to do with it though. I also changed the o rings on the ram sleeve and lubed it with sleek silocone lubricant ... maybe thats the problem? i really dont know but would love any help for troubleshooting... thanks!
try completely rebuilding the ram? --with the proper size o-rings and Dow55
check the poppet and see if that or the valve needs replaced.
try turning the LPR all the way down the raise it up to whatever pressure you normally shoot your gun at while shooting your gun with every turn. I usually have mine at around 85psi.
i am by far not an expert!
so why not just call BLast?