rpm not ramping
after reading the faq's and stickies, and searching the forum, my question is still unanswered.
this was done this morning, with a bnib new style rpm. no gas, no balls. eyes off, grip off, marker on. i was listening to the solenoid click. fresh battery (9.61v).
with my jumper out of the grip, i had semi.
with my jumper in aux, i had semi.
with my jumper in aux, and safety pushed once, i had auto.
now the problem:
with my jumper in j10, i had semi.
with my jumper in j10, and safety pushed once, i had semi.
there was no ramping, regardless of number of pulls, nor speed of pulls per second.
i looked at the jumper, and it appeared normal, as did the j10 socket itself.
any light or possible solutions anyone can throw my way would be greatly appreciated.