[xXTLXx Kryptonite]

My mini is leaking air right at the hole at the trigger when the backcap is fully tighten, I turn it counter-clock and the air rushes into the ball chamber.

I bought a new solenoid and a new popper hoping it would fix it and it hasnt. The orings are fine. they are tight, perfect and greased. Body gasket looks fine with no damage. Anyone know WTF is going on with my mini?

Thanks.

[doomie]

Originally Posted by xXTLXx Kryptonite

My mini is leaking air right at the hole at the trigger when the backcap is fully tighten, I turn it counter-clock and the air rushes into the ball chamber.

I bought a new solenoid and a new popper hoping it would fix it and it hasnt. The orings are fine. they are tight, perfect and greased. Body gasket looks fine with no damage. Anyone know WTF is going on with my mini?

Thanks.

I had an issue where my bolt wouldnt cycle fully and the orings looked perfect. I changed them anyway and the problem went away. You may want to change the rings regardless of how they look. But I'm not sure this will fix your issue, just a suggestion.

[xXTLXx Kryptonite]

Ok. I cleaned the bolt, replaced all orings, and lubed properly. My bolt is staying pushed forward allowing the air to escape. When I push it back with an allen wrench the air almost stops completely. Any reason why it is doing this?

Thanks

[jdogg246]

what kind of bolt

[xXTLXx Kryptonite]

It is all Stock parts