To Viking Owners - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 03-30-2002, 04:42 AM #1
saiyanpride1869
 
 
saiyanpride1869's Avatar
 
Join Date: Mar 2002
Location: NYC
saiyanpride1869 is a Supporting Member
 has been a member for 10 years
To Viking Owners

Any of you mounted a warp feed, and using the warp feed port on the board?

I tried, and all I get is constant spinning, when I checked the trigger switch, it looks like the switch is default close, and when actuated, open.

I checked the wires coming out of the warp port, and with the trigger not depressed, I get voltage, and same when I actuate the trigger, no change.

Anybody have an idea why this is happerning?


Thanks
__________________
02' PBX Excal
02' Free Flow Eblade
04' Empire Timmy
Feedback:
http://www.pbnation.com/showthread.php?s=&threadid=507344
saiyanpride1869 is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 03-30-2002, 05:07 PM #2
Paulis
 
 
Paulis's Avatar
 
Join Date: Jul 2001
 has been a member for 10 years
Do you have the Data Cable? I think you need it to activate the warp.
Paulis is offline  
Old 04-01-2002, 01:57 PM #3
saiyanpride1869
 
 
saiyanpride1869's Avatar
 
Join Date: Mar 2002
Location: NYC
saiyanpride1869 is a Supporting Member
 has been a member for 10 years
Well, just had a chat with AKA, and they said that the boards on the vikings are not set up to work with warp yet.

I solved the problem by tracing the circuit down, and then solder the warp feed pulse wires directly to the points on the board that trigger the feed pulse.

If anybody wants to install a warp on their Vikings, and wants to know how to do this, PM me, and I'll tell you how to do it.
__________________
02' PBX Excal
02' Free Flow Eblade
04' Empire Timmy
Feedback:
http://www.pbnation.com/showthread.php?s=&threadid=507344
saiyanpride1869 is offline  
 




Posting Rules
Forum Jump