solenoid housing

Callahan C83 · 01-31-2009, 10:30 AM

can you put a karn manifold on a worrblade and steal us the worrblade solenoid.....

Drix · 01-31-2009, 10:50 AM

"can you put a karn manifold on a worrblade and steal us the worrblade solenoid....."

I read the question two ways:

1) Can you put a Karni manifold on a worrblade and still use the worrblade solenoid.
The answer would be yes, all solenoids are the same for the cockers so there would be no voltage differance.

2) Can you put a Karni manifold on a worrblade and steal us the worrblade solenoid.
Sure, you could steal the solenoid, but then nothing would drop the sear to fire the marker.

Callahan C83 · 01-31-2009, 10:56 AM

my bad....i put the housing on but no air is going through

Drix · 01-31-2009, 12:22 PM

The housing itself shouldn't matter.

How's your LPR set? If it's too low it might not be letting enough air through. Are your hoses connected correctly? LPR hose should go to the middle barb, front barb to front of ram, rear barb to rear of ram, least thats how I remember it, I don't have my gear with me to double check.

Callahan C83 · 01-31-2009, 05:55 PM

it was the wire it was cut into.......she works .....thinks