[z4ck]

Originally Posted by juggernaught_lives

is it a QD or screw on?

screw on unfortunately.

[awhitee5]

so the trigger on the marq 6 i just bought bounces against the bottom part of the trigger frame towards the rear. so much so that the previous owner has worn the paint off of where it hits. is that typical?

[awhitee5]

you need something about installing the s-class trigger for the marq 6... because i just got mine today and have no idea how to get this thing in correctly.

[SKI008]

To install a trigger:

1. Take the frame off and unplug the wires and all that.
2. Unscrew the trigger pin
3. Remove trigger pin and the trigger will fall out along with the return spring
4. Slide spring over the screw on the new trigger
5. Put trigger back in through the top
6. Screw the pin back in

[CHRONOBREAK]

where can i get a replacement feedneck wedge and screw?

[wyckofflax16 (Banned)]

call blast mike..im sure they can hook u up

[CHRONOBREAK]

forsure.
i emailed them, hopefully they get it!

[Xxchaosballer777xX]

which way do i turn to lower LPR?

[Xstr8edgekillahX]

thread is really helpful to marq owners thanks alot!

[niteowl79er]

taken from the original sticky thread:

WHAT SHOULD MY SETTINGS BE FOR THE NEW HIGH EFFICIENCY ENGINE?
For Tadao Users only: Have a long trigger throw, make your activation point LATE in the pull, LPR 50psi, AMB 3, BIP 3, Bolt Delay 13

why such a big diffrence between LPR settings from the stock to the Tadao board?
from 75-85 psi to 50 psi
not that i'm having problems, but just curious.

[badness]

could the poster that posted the pics on how to lube the marker fix the last few pics? They don't work.

[AlmightyRuler]

I've thought about this for a while now & it seems the detent description is not very specific. In fact if someone was trying to find out I bet that wouldn't help very much.

Also, is the recommended LPR pressure using the Proficiency Engine actually 50 psi or is that a typo? BLAST set mine to 62 psi when I sent it in.

[Nj_Balla791]

okay, adobe's not working for me. what color is for modes on the board for marq's(white board) and what color is the rof cap for 15??? i need it for tonight please lemme kno asap

[skylermertz]

do any of you guys have a link to fix a leak coming down the barrel of the PE kit? its a tiny leak not the louder leak when you roll an oring.

[paintblob]

Hey I havent seen a how to tune your marq thread, am I missing something?

[IgnoranceInABag]

can we add a pic compairing the two engines? im sick of the bi-weekly "Do i have a PE" threads

[Infantry-Anthony (Banned)]

Great FAQ, it really helped me to learn more about my marq and how i can get some things fixed. Thanks!

-Anthony

[TaterT]

I'm trying to set my deboune for the frenzy 3.0 board. When I follow the instruction all I get is the white light flashing without shutting off. What am I doing wrong?

[dsp]

how do you know if it needs to be LPR TESTED

[IgnoranceInABag]

Originally Posted by TaterT

I'm trying to set my deboune for the frenzy 3.0 board. When I follow the instruction all I get is the white light flashing without shutting off. What am I doing wrong?

sounds like your board isnt flashed

Originally Posted by dsp

how do you know if it needs to be LPR TESTED

you will need to lower your lpr if
A. your gun has an exxessive ammount of kick
B. your gun has very poor efficiency (need to tinker with both regs as well as your dwell to fix this)

You will need to raise your lpr if
A. your gun does not fully cycle
B. You are having FSDO issues
C. You are getting drop off (Velocity gets lower during long strings of shots)

[dsp]

where do you raise or lower it