Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 10-17-2008, 03:03 PM #1
vincethedevil
 
 
Join Date: Dec 2007
Pmr leak

Hi guys my PMR has a bad leak coming out of the hole on the back cap (it's not a normal leak it has a very high flow) and when i put my finger on the hole, it pushed the bolt forward and start leaking by the breach. Any idea of what can cause this ?
vincethedevil is offline   Reply With Quote
Old 10-17-2008, 03:07 PM #2
jeremyO
 
 
Join Date: Aug 2008
check all of ur o-rings on the bolt and the on the back cap then lube ur bolt
jeremyO is offline   Reply With Quote
Old 10-17-2008, 03:31 PM #3
vincethedevil
 
 
Join Date: Dec 2007
done and it still leak
vincethedevil is offline   Reply With Quote
Old 10-17-2008, 06:31 PM #4
ooSNlCKERSoo
 
 
ooSNlCKERSoo's Avatar
 
Join Date: Jan 2008
Location: Cypress/Houston TX
battery first...change out the o-ring that it tells you on troubleshooting in ur manual...
__________________
proto>dye


pmr(black)/dye feed neck/ndz backcap/freak jr barrel/halo b rip drive/45 4500 crossfire tank/empire tank cover/pink frame screws
ooSNlCKERSoo is offline   Reply With Quote
Old 10-21-2008, 02:34 PM #5
Sane
IYDKMIGHTKY
 
Sane's Avatar
 
Join Date: Oct 2008
I had the problem, its the o-ring inside the can. Take the bolt apart and look inside. There is a small o-ring inside the actual hole. Try making sure its in there good. Maybe replace it. To much velocity will move it.

Last edited by Sane : 10-21-2008 at 03:06 PM.
Sane is offline   Reply With Quote
Old 10-21-2008, 06:36 PM #6
vincethedevil
 
 
Join Date: Dec 2007
?

how a new battery will change something ? because i broke my harness so their is just no battery in my gun . Can it be the case of the leak
vincethedevil is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump