[ferrari4756]

hye guys i just got my epiphany and there is a leak somewhere around the board.

its in one of those fittings.

what do u think the most common leak would be?
in the qev maybe?

[paintballinfl]

unscrew the grip frame screws (and the one in the breech) then air it up and see the exact point where its leaking from, thats the best way for us to help u

[bracer028]

if it sounds like it is from the board, its more than likely the middle banjo.

[ferrari4756]

okay like what do u mean by the middle banjo? when i took the body off the frame, i have three tubes. one going to the reg, one the qev, and the other going to somewhere in the back of the body.

are the tubes going to the reg and the one to the back of the body banjos?

are those the only banjos that could be leaking?

[victoralphacharlie2]

The banjo's are what's attached to the ends of the hoses. One thing you can do is make sure that the two banjo fittings and the qev are as secure as possiable and leave the body screws off the gun so you can slightly lift the body up. Then attach your tank and slowly and carefully turn the air on, once it airs up listen and feal for where the air leak is coming from. But make sure everything is secure b/c you could run into some trouble if something pops loose when you air it up