Are there Eyes on both sides?

nickdude · 08-08-2008, 05:52 PM

Just picked a Marq 6 and was checking it all out. I was looking at the eyes and noticed only one side has an "eye" while the other is just a hole. Is this normal?

Here is a picture

Hell-Intimidator · 08-08-2008, 06:00 PM

No, it is not normal. The one with hole is broken.

nickdude · 08-08-2008, 06:17 PM

Broken? It's brand new! It's just not there

Do I dare disclose who the retailer is.

TcJayLee · 08-08-2008, 06:22 PM

^ I think you should tell where you bought it from.

Hell-Intimidator · 08-08-2008, 06:26 PM

Brand new with no eye on other side? Is there clear glass on other side? (I feel like picture can trick us) One side usually go black glass and other side usually clear glass. If there's no clear glass there, call BLAST and they wil hook you up.

TcJayLee · 08-08-2008, 06:27 PM

^ It doesnt even look like it has a clear eye on the other one.

nickdude · 08-08-2008, 08:31 PM

No there is nothing there. I took the picture with white paper so you could see right through it.

Looks like Jeff at Action Center may have some explaining to do!

From another thread

Quote:

Originally Posted by RampageVA

Ordered a Marq 6 from Action Center and I do not suggest doing so. The gun came board un-flashed, did not have a pillow-bolt, and did not have a milled LPR slot. The board or the eyes were either defective because It was impossible to turn the eyes on, called up BLAST and had to send it in the day it came in the mail.

For the record mine does have a pillow but no lpr slot. Don't know how I would tell it's a 3.0 board

SKI008 · 08-08-2008, 08:41 PM

Well from AC to make sure you get the completely upgraded version of the gun you need to pay $50 extra.

The easiest way to tell if you have Frenzy 3.0 or the normal board is to try to adjust the dwell or something through the trigger. If you can't do it through the trigger, then you have the normal board.

nickdude · 08-08-2008, 08:48 PM

Quote:

Originally Posted by SKI008

Well from AC to make sure you get the completely upgraded version of the gun you need to pay $50 extra.

The easiest way to tell if you have Frenzy 3.0 or the normal board is to try to adjust the dwell or something through the trigger. If you can't do it through the trigger, then you have the normal board.

Thanks, The day after it was shipped they changed the descriptions to add the info on the "upgraded" models!

Never thought to ask the right questions. Maybe I should have given Bob Long as my delivery address so I could have saved myself the trouble.

Hell-Intimidator · 08-20-2008, 10:19 PM

3 broken eyes I found so far.

Scotty823 · 08-20-2008, 10:49 PM

Hell-Intimidator---- i hate your sig

Hell-Intimidator · 08-20-2008, 10:56 PM

Quote:

Originally Posted by Scotty823

Hell-Intimidator---- i hate your sig

ApolloAnton · 08-20-2008, 10:59 PM

Quote:

Originally Posted by Scotty823

Hell-Intimidator---- i hate your sig

I second. I had my speakers turned up too...

juggernaught_lives · 08-21-2008, 12:05 AM

HAHA Scott fell for the Sig.

And the one side is missing the Eye piece. Call BLAST they'll get you straighten out.