marq problem

konnorpb · 08-19-2008, 06:17 AM

okay,
MARQ PROBLEM
I have a marq rapper, brand new, i know it has the lpr set at 80 and the hpr set at ? maybe 250... why the hpr so high? because it doesn't shoot with enough force at 220.. or 200. But at 250 it still doesn't have force enough to shoot the paintballs out. It does shoot, but it shoots like about at 180 fps.

Dwell is set to 12 but i've tried shooting at 8 and 10 also, no change at all.

Please HELP! i'm getting kind of disappointed here with my marq...

LPR & HPR TESTER PROBLEM

Okay,
my tester isn't working right either, I slide it in and when I air it up it leaks! with my marq I did get a o-ring kit which I used 4 o-rings to replace the old ones from the tester but it still leaks. I know its not my Marq because I actually used a friends tester and it worked fine. I need to say that the tester isn't lubbed because I dont have any dow55 or dow33.

Please help, What is the problem with my marq?
What is the problem with my Tester?
What can i use on the tester instead of Dow55 (where i live i cant get dow55, for a couple of monts now, im from south america)

Please Help... Brand new gun...just a week old

tniz · 08-19-2008, 08:18 AM

Are you're holes on the engine lined up? Check for any oring debri as well

crc10ski · 08-19-2008, 09:36 AM

Your tester will not work without lube. You need lube for your gun too. You can find it here Good Luck

konnorpb · 08-19-2008, 11:51 AM

okay,

I forgot to mention that when i checked the LPR pressure it was at 150PSI (LPR) could it be that it did some damage to the solenoid??

the_pb_pirate · 08-19-2008, 03:14 PM

That could definatly be your problem.

The marq solenoid is not supposed to be able to handle more than 100 psi.

konnorpb · 08-19-2008, 05:28 PM

so i should send it in? how much do you think it will costme to replace that?

konnorpb · 08-20-2008, 08:09 PM

okayy LPR & HPR tester already it is solved Instead of using lube (which i dont have at the time now) i used actuall PAINT from a paintball and it worked just fine! LOL!

lynnwood · 08-20-2008, 08:42 PM

not to be mean but honestly if you don't even own ANY lube and you used paint ,whats the reality of you fixing the gun ?send it in to BL

konnorpb · 08-20-2008, 09:15 PM

well, it isn´t that i dont own lube its that here they dont SELL DOW55 ( I live in South America, even though i had a million dollars I couldnt get it here at least in 2 weeks).

But now is in its way to boblong...

lynnwood · 08-20-2008, 10:02 PM

well let me say iam sorry ,i did not know you are in south america ,so ya that does change my thoughts on the whole matter

lynnwood · 08-20-2008, 10:12 PM

so your lpr is at 150 wow ,first thing get it set to 75-80whats the hpr get it to a normal level,hpr can affect lpr ;example hpr 230 with a lpr of 75 ,hpr of lets say 380 would increase to a estimate of your 150 lpr
then clean and relube (when possible) every thing ,check to see if all 3 holes on the engine are lined up ,check your air passages in the gun ,reset the board to factory settings ,battery of course oil the bolt.post back with the results