[markade]

did'nt get chance to play with it yet. no time and no place to go. just my back yard. working on it.

[Tainen]

another way to fix that is to get a new striker seal. I know you can find them if you look around hard enough, but brand new striker seals (the attached O-ring looking seal on the front of the striker) usually revitalize TESs/Torid Xs/R1s...

[howie97]

hope you guys can answer a question for me. i have a T.E.S marker and when i fire balls through it 1 trigger pull makes it fire 3 or 4Xs but when i fire with no balls it fires once and locks back for the next shot, what could be wrong?

[xpistalpetex]

your eyes could be dirty, on auto mode, or microswitch is bad?

[howie97]

my eyes are disabled and it worked fine without them. i just replaced the swith and haven't tried it yet.

[xpistalpetex]

if it works fine with eyes disabled, then it would seem your eyes could be the problem.

[howie97]

the eyes have been disabled for a year or so and worked fine till last summer mid game it started acting up and i cant get it to stop. seems i might just have to buy another gun.

[jer&nish122004]

my tes is still not recocking... the paper holes being put in the sear spring didnt work... any other ways of fixing this?

[rodeo79_99]

Originally Posted by jer&nish122004

my tes is still not recocking... the paper holes being put in the sear spring didnt work... any other ways of fixing this?

What is your air pressure at the reg gauge? It should be around 300 to 400 psi if it is all stock! If it is not all stock and you changed the spring pac,then you maybe running to stiff of a main spring..Otherwise you could have a bad o-ring on the striker or valve!!

[Triple_F]

The hammer oring on the tes is a mushroom seal kinda like the old f4 illustrators . I have 3 of them at my shop .
If someone wants one just PM me.